New Student
Currently Offline
Posts: 29 
A+'s: 0
Joined: Sept 2, 2015 8:00:44 GMT -6
|
Post by rooman on Oct 19, 2015 13:56:07 GMT -6
I admit I still want to find a bbk (for my vs125) but I'll have to do it the hard way.
What is the correct way to reference a cylinder bolt pattern? Measured outside to outside? Inside to inside? Centre to centre? Horizontal --, vertical l, diagonal /...?
|
|
|
|
Post by JR on Oct 20, 2015 6:20:39 GMT -6
I do believe it's center to center.
JR
|
|
New Student
Currently Offline
Posts: 29
A+'s: 0
Joined: Sept 2, 2015 8:00:44 GMT -6
|
Post by rooman on Oct 20, 2015 12:04:27 GMT -6
That's logical, but which way? Some patterns are square, others rectangular: diagonal?
|
|
|
|
Post by JR on Oct 21, 2015 12:13:52 GMT -6
|
|
|
|
Post by cyborg on Oct 21, 2015 14:29:22 GMT -6
center to center it is diagonally
|
|
New Student
Currently Offline
Posts: 29
A+'s: 0
Joined: Sept 2, 2015 8:00:44 GMT -6
|
Post by rooman on Oct 25, 2015 13:12:45 GMT -6
Thanks a lot for clear info.
My VS125 is 86mm center-to-center diagonally, on a rectangular pattern, clearly not a normal GY6 clone.
Many web vendors claim their BBK will fit but how to know when they don't give stud spacing?
|
|
