New Student
Currently Offline
Posts: 16 
A+'s: 0
Joined: Oct 5, 2014 21:11:30 GMT -6
|
Post by matto on May 19, 2015 19:53:22 GMT -6
Hello, took my Lance Duke 250 out for the first time this year! Everything is running good but I have a few problems, My light switch, running lights front and rear and markers like do not work and also my kill switch doesn't work. The brake lights work and the passing light works so I'm thinking it has to be in either the two switches or wiring or a fuse. My question is where is the fuses? What else should I check thanks
|
|
|
|
Post by JR on May 20, 2015 6:31:57 GMT -6
The kill switch circuit has no fuse and if this happened all of a sudden the first thing to look for is a pulled wire in the harness on a plug or even very dirty connections, just had to do some plug connector cleaning myself. It's also possible you have a bad key switch too? Going to have to open her up and start looking at plug connections, start with the key switch.
JR
|
|
