New Student
Currently Offline
Posts: 5 
A+'s: 0
Joined: Feb 26, 2015 6:39:42 GMT -6
|
Post by dwint on Feb 26, 2015 6:44:58 GMT -6
i had some bare wires and caused them to melt the outer coating of the wires.i have everything working good except the brake light wires from the switch were totally melted.i remember a green with yellow stripe but dont know the other.do i tie the green into my blinker?that is green and yellow.what about the black
|
|
|
|
Post by JR on Feb 26, 2015 21:42:22 GMT -6
What make and model scooter do you have? here is a colored diagram that maps out the brake light system for most Chinese scooters. Also if you could take some photos of the troubled area it would be of great help.  To view this in a larger easier to read image just click on the photo. JR |
|
New Student
Currently Offline
Posts: 5
A+'s: 0
Joined: Feb 26, 2015 6:39:42 GMT -6
|
Post by dwint on Feb 27, 2015 9:38:31 GMT -6
its a 2011 jonway 2t don't know the model number but there are many like it.it has two head lights with the hockey mask.same as roketa,tank,limited edition.now my brake light is always on and my front directionals are the opposite.it starts without pulling in the lever,i assume its because there is no wires on the brake switch
|
|
|
|
Post by JR on Feb 27, 2015 10:01:49 GMT -6
its a 2011 jonway 2t don't know the model number but there are many like it.it has two head lights with the hockey mask.same as roketa,tank,limited edition.now my brake light is always on and my front directionals are the opposite.it starts without pulling in the lever,i assume its because there is no wires on the brake switch I'm going to need some up close pictures of your wiring from the flasher and your brake lever switches, need to pull the front off and show me some details, you have got wires crossed somehow and I can only walk you through how they have to be by seeing what you have. The other thing you can do is map them out exactly like the wiring diagram shows to do. |
|
New Student
Currently Offline
Posts: 5
A+'s: 0
Joined: Feb 26, 2015 6:39:42 GMT -6
|
Post by dwint on Feb 28, 2015 7:15:06 GMT -6
ok will do.now my front blinkers are opposite and the brake light stays on so I have some issues going on |
|
New Student
Currently Offline
Posts: 5
A+'s: 0
Joined: Feb 26, 2015 6:39:42 GMT -6
|
brake lights
by: dwint - Feb 28, 2015 8:20:14 GMT -6
via mobile
Post by dwint on Feb 28, 2015 8:20:14 GMT -6
I see on my laptop where to insert image but not on my phone
|
|
|
|
Post by JR on Feb 28, 2015 8:34:41 GMT -6
Download photos from your phone to laptop and go from there.
|
|
New Student
Currently Offline
Posts: 5
A+'s: 0
Joined: Feb 26, 2015 6:39:42 GMT -6
|
Post by dwint on Mar 14, 2015 20:16:53 GMT -6
 im not sure if you got a picture but I rewired everthing and put in a new brake switch.when I push the start button im blowing fuses and I think it is because of this lawn mower solenoid.i don't know if the picture will post or not but lets see |
|
