Post by fugati on Nov 6, 2013 13:10:36 GMT -6
all the running lights on my fugatti do not work. i recently got a big boy kit installed and put a new roketta carb on it. when i first went to put on the kit i took my seat off and seen two wires coming from the front of the scooter. they were not connected to each other. they fit inside each other but one has 2 wires and the other has 3 and no wires match in color. i had plugged them up at first thinking they went with each other. i installed the big boy kit and carb and after trying to start it for 30 minutes realized it wasnt going to start. i had removed the stator to make sure the wires were all connected they were so i reinstalled it. i figured it wasnt getting right ground so i cut the black killswitch cable and she fired right up. but my rear running light; the small light above the headlights in front of dash; and instrument lights do not work. i also j recently found out it wouldnt start bc the two wires i plugged up together in the beginning was the problem. i unplugged them and connected the black wire for the killswitch back together. my scooter runs AMAZING!!!! just i have no running lights. for the knowledge i have on scooters im thinking the problem is in the stator. but then again wouldnt it not crank if it was my stator???
