New Student
Currently Offline
Posts: 5
A+'s: 0
Joined: Apr 26, 2013 20:12:35 GMT -6
|
Post by oldmopars on Aug 8, 2013 21:34:13 GMT -6
I need to remove the Alarm on my Roketa MC-54-250B. Does anyone know how to do this? My remote is gone and I just want to use it with out the stupid remote anyway.
|
|
New Student
Currently Offline
Posts: 5
A+'s: 0
Joined: Apr 26, 2013 20:12:35 GMT -6
|
Post by oldmopars on Aug 9, 2013 6:13:14 GMT -6
problem is that my alarm got set, then the key fob was lost. I had the fob in a drawer and was not using it, but a kid found it, set it, then lost it while I was at work. So I come home and it is set and I can not turn it off. I just pulled the battery and am using my Goldwing right now, but I want to totally remove it so this does not happen again.
|
|
|
|
Post by JR on Aug 9, 2013 8:29:34 GMT -6
Pull the front windshield cover and windshield off and the alarm control box is on the right side of the scooter with you facing the scooter. Generally it'll be reachable with just these things removed. It will have a large plug going into it with a lot of wires, simply unplug it.
JR
|
|
New Student
Currently Offline
Posts: 5
A+'s: 0
Joined: Apr 26, 2013 20:12:35 GMT -6
|
Post by oldmopars on Aug 9, 2013 9:56:32 GMT -6
I did that a while ago and it would not start, I will try again.
|
|
Junior
Currently Offline
Posts: 138
A+'s: 0
Joined: Aug 7, 2012 8:24:21 GMT -6
|
Post by wheezy on Aug 15, 2013 7:07:09 GMT -6
I removed mine the week I brought it home. Same result. I had discovered it had blown the fuse when I started it using the fob. It would still start every time with the fob only, but wouldn't key start until I replaced the fuse.
|
|
