exelleration power By dnvr (Read 851 times)

[dnvr]

I have a jinan qingqi scooter I do not have power when exellerating I need to exellerate at a very slow pace no power please help what could be the problem have to slowly get to exellerate it's very frustrating

[JR]

Can you give us a little more info on exactly how it does, like does it still top out well or is it stumbling at midrange, etc.? Several things come to mind for these problems, the first being "have you ever adjusted the valves?"

JR

[inuyasha]

Hi
Welcome aboard
Pleased to meet you
You need to clarify, does the scoot run properly and the acceleration curve is not too your liking? or is the scoot not running properly and that's the cause of its slow acceleration?
If its the first theres things that can be done to tune the CVT for quicker acceleration
Take care and ride safely
Yours Hank

[alleyoop]

What model scooter do you have.
Look at this link and tell us which scooter you have. Also look on the side of the motor and tell us what motor is on there.
Do you know if it is a 2 stroke or 4 stroke?
Alleyoop
.qingqi.com.cn/en/productlist.aspx?cid=13" rel="nofollow" target="_blank">.qingqi.com.cn/en/productlist.aspx?cid=13

[oldchopperguy]

It could be a number of things. I had similar trouble with my Xingyue 150. It acted like a carbureted car with a bad accelerator pump. I raised the "needle" in the carb slide so it opened faster, and that made a big difference. My engne is a GY6 150 4-stroke.

Changing the needle setting is fairly easy, and may give you an indication that it either IS, or is NOT your trouble.

Hope this might help,

Leo in Texas