New Student
Currently Offline
Posts: 4
A+'s: 0
Joined: Oct 26, 2012 13:46:07 GMT -6
|
Post by mfr666 on Nov 27, 2012 22:03:55 GMT -6
Hey! So I'm cruising down the road on my Tank 150cc. Kinda hit a bump in the road, bike lost power ,coasted to a stop. Won't start, gonna check it out in the day- but- how would i know if i smoked the motor? There was no big bang or smoke? Any input apreciated.
|
|
|
Post by alleyoop on Nov 27, 2012 22:30:47 GMT -6
No, I doubt you blew the motor, most likely something came loose, check the Spark Plug Boot on the plug it may have come loose. Also check around the Carb area for hoses that may have come loose and or the Air Intake tube came off the carb etc.. Or the Intake manifold cracked on you etc..
Let me Ask this DOES it crank over but will not fire? Also check the connections on the back of the COIL there are two wires make sure they did not pull out. Alleyoop
|
|
|
Post by justbuggin2 on Nov 27, 2012 22:45:05 GMT -6
i agree with Alley you need to look it over real good
|
|
New Student
Currently Offline
Posts: 4
A+'s: 0
Joined: Oct 26, 2012 13:46:07 GMT -6
|
Post by mfr666 on Nov 28, 2012 1:18:38 GMT -6
thank you for the ideas where to look. I think you guys are right-something came loose. thank god for these forums too. It does turn over fine-ill wait til daylight to mess with it
|
|
|
Post by terrilee on Nov 28, 2012 9:11:16 GMT -6
this happened to me with a month of owning Chrissy.
idk how but i found my prob. the spark plug boot came VERY slightly off. not enough to think it was loose, by just looking, but i pulled it off, pushed it back on and BAM started right up. so just dont look to see if things look right, unplug 'em, plug 'em back on
|
|