Need a Bolt By damin69 (Read 658 times)

[damin69]

Ok since I have some time now we decided to Pull the Motor in the POS Roketta and put all new Gaskets in it so I can get it running and Sell it. Well Just putting it back together started putting the head on I was snugging up the first bolt on the head and it snapped off. Lucky it was just a M6 Flange bolt but I still need to find where to get one this length.

I need a M6x120mm Flanged head bolt.

Anyone by chance know where I can get one at? I am hoping I do not have to go to Fasten all and special order one that would really suck cause it would be expensive.

[JR]

Todd here is some used ones that may fit? Got a good picture and you could PM the seller and ask about the size?

.ebay.com/itm/HEAD-VALVE-CAM-SHAFT-COVER-BOLTS-1986-86-HONDA-CN250-CN-250-HELIX-/160895439048?pt=Motorcycles_Parts_Accessories&hash=item25761d90c8&vxp=mtr" rel="nofollow" target="_blank">.ebay.com/itm/HEAD-VALVE-CAM-SHAFT-COVER-BOLTS-1986-86-HONDA-CN250-CN-250-HELIX-/160895439048?pt=Motorcycles_Parts_Accessories&hash=item25761d90c8&vxp=mtr

Here's another place that may have what you need, they do list scooter flange bolts:

.ebay.com/itm/6mm-FLANGE-BOLT-AND-NUT-SET-36-PIECES-FOR-CHINESE-SCOOTERS-ATVS-AND-KARTS-/180983922447?pt=Other_Vehicle_Parts&hash=item2a237b7f0f&vxp=mtr" rel="nofollow" target="_blank">.ebay.com/itm/6mm-FLANGE-BOLT-AND-NUT-SET-36-PIECES-FOR-CHINESE-SCOOTERS-ATVS-AND-KARTS-/180983922447?pt=Other_Vehicle_Parts&hash=item2a237b7f0f&vxp=mtr

Here's maybe another contact, are you very sure they are 6mm and not 8mm?

.ebay.com/itm/8mm-x-120mm-FLANGE-BOLTS-2-PIECES-FOR-CHINESE-SCOOTERS-WITH-150cc-50cc-MOTOR-/170851305011?pt=Other_Vehicle_Parts&hash=item27c7880633&vxp=mtr" rel="nofollow" target="_blank">.ebay.com/itm/8mm-x-120mm-FLANGE-BOLTS-2-PIECES-FOR-CHINESE-SCOOTERS-WITH-150cc-50cc-MOTOR-/170851305011?pt=Other_Vehicle_Parts&hash=item27c7880633&vxp=mtr

If no luck call the Big Guys shop and ask for him or Tom:

fxmotorsports.net/

They don't open until 10:00 a.m. central or call Dave with Abscooters. One of them can help.

JR

[damin69]

Yep 100% sure it is 6mm.

[alleyoop]

TVNACMAN has 6mm and 8mm with nuts PM TVNACMAN. I know cause I got some from him.
Alleyoop

[tvnacman]

m6x120mm no go for me , if they were m8 I can work with that .

John

[damin69]

Thanks Guys. I will keep looking.

[JR]

Like I said Todd call Dave with Abscooters or the Big Guy they have shops and work on this scooter.

JR

[damin69]

I have been gone most of the day. So I will give them guys a call. I am sure it will all come out in the end.

I will give Dave and Big Guy a call this week.

The one is Item Number 5 in the following blow up.

.roketa.com/product/parts_detail.jsp?partId=42037&partName=E1.CYLINDER%20COMP%28%E6%B0%94%E7%BC%B8%E6%80%BB%E6%88%90%29" rel="nofollow" target="_blank">.roketa.com/product/parts_detail.jsp?partId=42037&partName=E1.CYLINDER%20COMP%28%E6%B0%94%E7%BC%B8%E6%80%BB%E6%88%90%29

[JR]

I thought you were rebulilding the other scooter not the 260 so I'll look eleswhere.

JR

[damin69]

Sorry JR...... Guess I should have been more specific which one I was tearing into. ;D