|
|
mc-54-250b
by: tvnacman - Aug 5, 2012 11:43:28 GMT -6
Post by tvnacman on Aug 5, 2012 11:43:28 GMT -6
Do you have a meter ? It could be the solenoid , but you have to see what the battery voltage drops to while cranking . You can fully charge a battery , but it may still be bad . You can bring it to an auto place and have it load tested .
If you just want to throw parts at it I have a soleniod for it .
John
|
|
|
|
mc-54-250b
by: tvnacman - Aug 5, 2012 11:59:03 GMT -6
Post by tvnacman on Aug 5, 2012 11:59:03 GMT -6
i have to get a meter, but i have two batteries, one brand new, i does the same thing,about the meter i just dont know how to use it, it has dials and i dont know how to set it so i can read it right post a pic of the meter I can walk you through it . two batterys same problem , it could be the solenoid . When you don't jump it does it click ? John |
|
|
|
mc-54-250b
by: tvnacman - Aug 5, 2012 12:58:35 GMT -6
Post by tvnacman on Aug 5, 2012 12:58:35 GMT -6
red wire in the bottom right hole , black is the center . top left switch needs to be long (dc) . turn the dial counter clock wise to 20 .
tocuh the battery red to pos and black to neg , tell me what you get scooter not running .
John
|
|
|
|
mc-54-250b
by: tvnacman - Aug 5, 2012 13:13:44 GMT -6
Post by tvnacman on Aug 5, 2012 13:13:44 GMT -6
did you plug it in the house outlet , the way I said to set it ?
John
|
|
|
|
mc-54-250b
by: tvnacman - Aug 5, 2012 13:19:01 GMT -6
Post by tvnacman on Aug 5, 2012 13:19:01 GMT -6
how old is the battery in the meter ?
John
|
|
|
|
mc-54-250b
by: tvnacman - Aug 5, 2012 13:22:34 GMT -6
Post by tvnacman on Aug 5, 2012 13:22:34 GMT -6
the battery or the meter ?
|
|
|
|
mc-54-250b
by: tvnacman - Aug 5, 2012 13:23:57 GMT -6
Post by tvnacman on Aug 5, 2012 13:23:57 GMT -6
turn it off then on again ?
John
|
|
|
|
mc-54-250b
by: tvnacman - Aug 5, 2012 13:28:05 GMT -6
Post by tvnacman on Aug 5, 2012 13:28:05 GMT -6
go for it , please take a more clear pic and repost .
John
|
|
|
|
mc-54-250b
by: tvnacman - Aug 5, 2012 14:10:49 GMT -6
Post by tvnacman on Aug 5, 2012 14:10:49 GMT -6
attach the probes to the battery and try to start the scooter see what the lowest voltage is while cranking .
John
|
|
|
|
mc-54-250b
by: tvnacman - Aug 5, 2012 14:19:55 GMT -6
Post by tvnacman on Aug 5, 2012 14:19:55 GMT -6
is it cranking and starting ? That voltage is low with either battery ?
John
|
|
|
|
mc-54-250b
by: tvnacman - Aug 5, 2012 15:05:27 GMT -6
Post by tvnacman on Aug 5, 2012 15:05:27 GMT -6
Have you gone over the grounds , good clean and tight connections . Have you checked the battery + cables for good clean tight connections . Are there any lights that can be turned off , reduce power consumption while starting . I would look into a larger cranking amp battery .
John
|
|
