|
|
Post by tvnacman on Jul 10, 2012 21:30:40 GMT -6
well can you see the problem ?  John |
|
|
|
Post by justbuggin2 on Jul 10, 2012 21:56:56 GMT -6
it not on the bike but the angle of the muffler flange looks off to me
|
|
|
|
Post by cruiser on Jul 11, 2012 0:36:07 GMT -6
It looks like the flange on the header end was welded on at a different angle from the original which throws off the alignment of the pipe. Also looks like the hole spacing on the header flange may be greater than the original. Is the welded on bracket usable? Also, one is shiny and the other is rusty?  |
|
|
|
Post by tvnacman on Jul 11, 2012 5:20:46 GMT -6
Good call guys. I hope where I got it from sees it too. I hope they will know what to look for when sending a replacement.
John
|
|
|
|
Post by alleyoop on Jul 11, 2012 10:17:47 GMT -6
I SEE IT, I SEE IT .. So how are the kids, Well they were alright until I turned their heads around   Alleyoop |
|
|
|
Post by tvnacman on Sept 22, 2012 20:12:49 GMT -6
well I got the replacement on Friday . It looks like it will work .
John
|
|
|
|
Post by justbuggin2 on Sept 22, 2012 20:44:20 GMT -6
it took this long to get
|
|
|
|
Post by tvnacman on Sept 23, 2012 6:11:48 GMT -6
yes that is what I go through , but now I know I can sell that pipe and it will work for the end user . It might have an angle issue and need some TLC to make it work .
John
|
|
..BAD TO THE BONE..