no spark By accord911 (Read 2,737 times)

[accord911]

checked out ac volt test the wires check out fine. org wire is on the coil. I unplugged the blk/ wht wire still no spark. I guess like you said most likely its the coil. Have to look for one . thank you, I will let you know when i get it and the out come. Have a good one

[accord911]

do you know how to measure the coil. i don't know what i was doing but i put my meter on 20k ohms and measured from where the spark plug hook up and the other lead to the other end of the coil. Each side where the coil gets bolted down and also on the terminal where the org wire goes. I got a reading of 5.24 k ohms. I hope i did it right?

[accord911]

checked coil bolted down on the bike and got a reading of 14.60 k ohms my first reading was coil off the bike why are they different?

[JR]

Try this tech tip acord911;

thescooterprofessor.proboards.com/index.cgi?board=5200&action=display&thread=1467

Click on the Monaco tech tip and on page 7 it tells how to test a coil and it is the GY-6 engine.

JR

[accord911]

sorry my computer won't open that link it keep wanting me close program.