Sophomore
Currently Offline
Posts: 97
A+'s: 0
Joined: May 3, 2012 21:56:27 GMT -6
|
Post by jlrod09 on May 13, 2012 20:52:11 GMT -6
im looking for performance parts this engine has 16inch wheels interested in : exhaust clutch + variator
and any other suggestions welcomed
thanks yall
they are for the scooter on my sig
|
|
Sophomore
Currently Offline
Posts: 97
A+'s: 0
Joined: May 3, 2012 21:56:27 GMT -6
|
Post by jlrod09 on May 13, 2012 20:56:32 GMT -6
i saw some stuff on scrappydogs site
|
|
|
Post by tvnacman on May 14, 2012 8:29:26 GMT -6
Are you interested in orange coil , cdi and irodum plug pod air filter? I don't know if there was/is any gain from it, but it made me feel better ! I have all that will fit.
John
|
|
|
Post by tvnacman on May 14, 2012 9:19:52 GMT -6
I had problems with Chinese carnal went through 2 of them. Then dug a little deeper and got a Keihin and a pod filter, the scooter woke up. It has a growl on mid to hard excellent. The Chinese carbs took 9 months between the two of them to go bad. The keihin is on there about two years trouble free.
John
|
|
Sophomore
Currently Offline
Posts: 58
A+'s: 0
Joined: Jul 11, 2011 6:51:51 GMT -6
|
Post by buford1488 on May 14, 2012 17:18:19 GMT -6
what kind of performance you looking for?? scrappydog is the man you will get it 2 day's or less. from vegas to pa. i get stuff in 2 days everytime. and cant beat the prices........just saying.thanks have fun.........buford....
|
|
Sophomore
Currently Offline
Posts: 97
A+'s: 0
Joined: May 3, 2012 21:56:27 GMT -6
|
Post by jlrod09 on May 14, 2012 19:55:33 GMT -6
thanks buford , i have checked the site and i only found 59mm bigbore kit
and a 4valve head too expensive fr me
|
|
Sophomore
Currently Offline
Posts: 97
A+'s: 0
Joined: May 3, 2012 21:56:27 GMT -6
|
Post by jlrod09 on May 14, 2012 19:58:01 GMT -6
thanks john i have all those parts , im looking for a much much, better proven to better than stock,,, clutch
|
|
Sophomore
Currently Offline
Posts: 97
A+'s: 0
Joined: May 3, 2012 21:56:27 GMT -6
|
Post by jlrod09 on May 14, 2012 19:58:24 GMT -6
and any other mechanical part
|
|
|
Post by alleyoop on May 14, 2012 20:30:58 GMT -6
That is a problem you will run into with that motor. There are not many performance parts made for it since it is not a very common motor. Alleyoop
|
|
Sophomore
Currently Offline
Posts: 97
A+'s: 0
Joined: May 3, 2012 21:56:27 GMT -6
|
Post by jlrod09 on May 16, 2012 17:25:54 GMT -6
that sucks . so the best i can do is go 155cc on it
|
|