|
|
Post by JR on Feb 15, 2012 13:03:15 GMT -6
yea the s******d*** scooter doc and scooter rebels i think this is the site that will be the main post Awesome justbuggin!  BTW you don't have to do the *********thing. We don't censor words of any kind here but of course we ask none of the bad words and another forum is not a bad word.  They want to play those games they can knock themselves out but not here.  Can't wait for it to come in!  JR |
|
|
|
Post by rapidjim on Feb 15, 2012 13:12:11 GMT -6
|
|
|
|
Post by justbuggin2 on Feb 15, 2012 20:27:33 GMT -6
thanks for the link Jim but i have already downlaoded all the info i could from their site as for mounting the feul pump i gonna use a clamp foe conduit so i dont have to rellied on a wire tie
|
|
|
|
Post by rapidjim on Feb 16, 2012 8:10:21 GMT -6
I am sure you will find other things you will want to do differently.
Jim
|
|
|
|
Post by JR on Feb 16, 2012 9:52:30 GMT -6
Thanks for the PDF Jim! Now when justbuggin gets this project going with pictures and descriptions if he doesn't mind I can put the whole thing together in a nice PDF how to in the tech setion for other future EFIer's! JR |
|
|
|
Post by justbuggin2 on Feb 16, 2012 20:12:33 GMT -6
Jr i hope you have a very good ventalation system in your office
|
|
|
|
Post by justbuggin2 on Feb 17, 2012 23:34:19 GMT -6
just an update i got the system in today going to check everything out and start making plans of how i will put this on the bike i going to take some pics and post them soon
|
|
|
|
Post by justbuggin2 on Feb 19, 2012 18:03:12 GMT -6
ok i am having a very hard time trying to get photos up on here . other than that i have got the system out and liad it out checking everthing the feul line that can with the system just dont fit the fittings very good they are a little to big so i took a y connector to the parts house and found 5/16 gates feul line fits much better and that the gates hose has a working pressure of 50psi the pump only gives 36 to 37 psi so i think it be fine the clamps that are included are ok but i got some better ones while at the parts house there was no good photo of how the feul pump is suppose to be connected so i cheated and contacted greg that has already done this to a 50cc the return line is ok and i did get a better feul filter i have now got the pump ready to go on the bike and i do have a port on the tank for the return line i cant wait for the weather to get better so i can get out and start putting this together on the bike
|
|
New Student
Currently Offline
Mainely Scooters!!!
Posts: 5
A+'s: 0
Joined: Dec 24, 2011 23:33:50 GMT -6
|
Post by mainepeace on Mar 9, 2012 20:10:44 GMT -6
My whole EFI experience can be amalgamated into a PDF if anyone wants to put forth the effort.
Greg
|
|
|
|
Post by justbuggin2 on Mar 9, 2012 23:29:17 GMT -6
ok i am looking to hook everthing up this weekend but i need to know which wire is the trigger and which is the ground from the pickup
|
|
|
|
Post by tvnacman on Mar 10, 2012 7:25:09 GMT -6
are you sure the p/u has two wires , did the kit come with a new p/u ?
I'm on the fence about this I would like to install this on the longbo with the 16" wheels . It runs excellent with the keihin carb strong fast . I have a problem with the rear brake , I have to sort that out first . I can't seem to get more than a few months out of a battery . It may have something to do with the six pin regulator , I think it is cooking the battery .
Tell me how do you read the ecu plug into your computer ?
John
|
|
|
|
Post by justbuggin2 on Mar 10, 2012 8:55:37 GMT -6
OK the system does not come with a pickup i was asking about the pickup that is on the motor that triggers the cdi to use the laptop computer to connect with the ecu there is a serial port on the harness the system comes with Procal software that you use to tune the system and read trouble codes
|
|
|
|
Post by tvnacman on Mar 10, 2012 9:04:24 GMT -6
so the p/u is working with system ground . can you please post a pic of the harness connector and the plug supplyed with the kit (both ends) can you make your own programming changes to the mapping / adjust the richness or leaness through the rate of fire/tps position ? Who did you get the system from ?
John
|
|
|
|
Post by justbuggin2 on Mar 10, 2012 19:36:11 GMT -6
hey Jr you can us any and all of this post and the 150cc efi post for your how to alot of it is just see what it will take to hook it up
Tvnacman the system came from Ecoton in one of the earlier pics is there address you can go to their site and download the software manaul , tuning giude , and all yes you can change the feul mapping and timing advance with their cdi
|
|
