New Student
Currently Offline
Posts: 4
A+'s: 0
Joined: Jun 22, 2018 14:48:31 GMT -6
|
Post by idon on Jul 16, 2018 8:03:58 GMT -6
The experience with the blue racing cdi is that it's junk,,,most are filled with sand,,,utter crap Works on my Tao Tao but not on my peace sports
|
|
New Student
Currently Offline
Posts: 4
A+'s: 0
Joined: Jun 22, 2018 14:48:31 GMT -6
|
Post by idon on Jul 15, 2018 8:23:08 GMT -6
Hello all, I have bought a couple of performance kits before on amazon for my scooters and all have worked right. I bought one not too long ago that came with a spark plug, performance coil plug, gas filter, air filter and blue CDI, I installed everything but the air filter. Now the problem I am having is that when I plug in the blue CDI the scooter starts but then turns off, I plug the stick one back up and it starts right away. I really want to use the blue one. Any suggestions what might be going on? I got it from amazon.
|
|
New Student
Currently Offline
Posts: 4
A+'s: 0
Joined: Jun 22, 2018 14:48:31 GMT -6
|
Post by idon on Jun 27, 2018 9:22:23 GMT -6
Led do not work with reversed polarity,,so you must have gotten it right,,,,solder and tape put the bike back together ,,,,ride Ok here’s the picture of the original wiring. I have 2 of the same scooters, well I just got it actually lol. So I guess the blue is the high beam, white low beam and green power? Now how would I connect that to the adapter H4 adapter which has only a black and red wire? imgur.com/a/hdXtEnhHere’s my real question imgur.com/a/gO8Wm4H
|
|
New Student
Currently Offline
Posts: 4
A+'s: 0
Joined: Jun 22, 2018 14:48:31 GMT -6
|
Post by idon on Jun 22, 2018 15:05:18 GMT -6
Hello all, not too long ago my cousin replaced my regular stick headlights for some LED headlights I bought from a friend and they both worked right until one of them blew out, so only one was working, so I ordered some more, different ones from Amazon. Now the problem is that if I conn for them wrong will they blow out? I followed the cables my cousin had connected to the old ones and I turned on the scooter so the lights can turn on and they do, but I’m guessing they will turn on anyways if I out negative on positive and positive in negative? Either way I don’t want to blow the lights off. I have some pictures of he wiring and the lights and the H7 connector to add to the lights so I can just plug them in but I’m considera as to what is positive and negative because their different colors. Any help would be appreciated. imgur.com/a/ObNhKDY
|
|