New Student
Currently Offline
Posts: 5
A+'s: 0
Joined: Jun 15, 2017 9:01:46 GMT -6
|
Post by nosam on Jun 20, 2017 14:38:31 GMT -6
Cut apart the main wire loom, here is what I can figure out by tracing wires and common sense Red-power supply Black- Ground/earth Red/white- brake kill switch, and the oil reservoir Brown White- Oil Reservoir Green- runs the length of the loom, then goes to a dark green. that dark green goes to the switch above the electric start button, also it goes to the CDI.
I am hoping from that information I can figure out what wire needs to go where in order to finally get the scooter running. any help or insight will be greatly appreciated
|
|
New Student
Currently Offline
Posts: 5
A+'s: 0
Joined: Jun 15, 2017 9:01:46 GMT -6
|
Post by nosam on Jun 19, 2017 16:22:10 GMT -6
I did some more playing around and the Solid black wire whenever it is touched by the solid red wire it sparks like crazy. also the Brown/white wire goes up to the gauge cluster.
|
|
New Student
Currently Offline
Posts: 5
A+'s: 0
Joined: Jun 15, 2017 9:01:46 GMT -6
|
Post by nosam on Jun 19, 2017 7:08:00 GMT -6
Where is the library at in the site? also in my original post I tried to give all the information I knew about the scooter. it is a 50cc and the person I got it from said it was called a sky breeze 50. the maintenance manual says Qjiang QJ50T-21B on it I don't know how to add pictures or I would have put a pic of the manual in the original post.
|
|
New Student
Currently Offline
Posts: 5
A+'s: 0
Joined: Jun 15, 2017 9:01:46 GMT -6
|
Post by nosam on Jun 18, 2017 21:42:17 GMT -6
I was hoping to be able to do this without spending a whole lot of money or shipping time since I am moving soon to a new city. from what I have found from my own research the solid red wire is power and the solid green is ground. Other than that I have no other experience with scooters as this is my first one.
|
|
New Student
Currently Offline
Posts: 5
A+'s: 0
Joined: Jun 15, 2017 9:01:46 GMT -6
|
Post by nosam on Jun 15, 2017 9:23:15 GMT -6
I have a scooter that I traded for from a friend. It is a 50cc he said it was called a Sky Breeze 50. The maintenance book says Qjiang QJ50T-21B on it. when I looked at where the key was supposed to be there was no key or plug just loose wires. the wire colors are Red, Red/white, Black, Green, Brown/white. I am wondering if there is a way I can get the wires hooked up to a switch or switches so that I can start and ride my new scooter
|
|