New Student
Currently Offline
Posts: 7 
A+'s: 0
Joined: Nov 16, 2013 11:00:32 GMT -6
|
vog 260
by: jonnybegood37 - Nov 21, 2013 16:47:33 GMT -6
Post by jonnybegood37 on Nov 21, 2013 16:47:33 GMT -6
i went thru the carb again ,gas pump jet was pluged up aka accl pump ,it has jet, spring and small bearing,i didnt know how to set the jet so i messed with it , it idles  twist throttle and vroooom! no bog at all ,just fine tune it ,joy ride time  ,there list of stuff that still needs help on it ,i need gage console ,body platics ,so for  , |
|
New Student
Currently Offline
Posts: 7
A+'s: 0
Joined: Nov 16, 2013 11:00:32 GMT -6
|
vog 260
by: jonnybegood37 - Nov 21, 2013 7:18:20 GMT -6
Post by jonnybegood37 on Nov 21, 2013 7:18:20 GMT -6
wont even idle now  aleast it idled with needle not hookup to the plunger?does the gas suppose to even flow out from the regulator or squirt little spots of fuel ???i know it runs on vacuum i replaced every line , this vog has me puzzled ,  |
|
New Student
Currently Offline
Posts: 7
A+'s: 0
Joined: Nov 16, 2013 11:00:32 GMT -6
|
vog 260
by: jonnybegood37 - Nov 20, 2013 14:12:07 GMT -6
Post by jonnybegood37 on Nov 20, 2013 14:12:07 GMT -6
i checked the timing marks ,checked /adjusted valves ,took carb off went completely thru it with compressd air ,plunger diagram needle wasnt hooked up to the plunger
|
|
New Student
Currently Offline
Posts: 7
A+'s: 0
Joined: Nov 16, 2013 11:00:32 GMT -6
|
vog 260
by: jonnybegood37 - Nov 17, 2013 18:32:56 GMT -6
Post by jonnybegood37 on Nov 17, 2013 18:32:56 GMT -6
thks jr ,im giving it all the tlc i can to bring it back to life ,it needs lots of work ,so far she will start and idle ,but thats all as soon as yu give it gas it dies ,i already replaced both fuel filters,all the vacuum lines/fuel lines ,spark plug ,fuel, took the carb went thru it ,jets,poilt jet float and seat ,acts like its not getting gas ,tomorrow i will check vavles ,timing marks ,and take off carb go thru it again with b12 carb cleaner ,
|
|
New Student
Currently Offline
Posts: 7
A+'s: 0
Joined: Nov 16, 2013 11:00:32 GMT -6
|
vog 260
by: jonnybegood37 - Nov 17, 2013 14:28:52 GMT -6
Post by jonnybegood37 on Nov 17, 2013 14:28:52 GMT -6
idk when it was runnig good i got for free beening trying to make it run i finally got it to start after replacing the lines ,i already took the carb off and cleaned it good even the jets with compressd air , i just checked the spark plug looks fouled out
|
|
New Student
Currently Offline
Posts: 7
A+'s: 0
Joined: Nov 16, 2013 11:00:32 GMT -6
|
vog 260
by: jonnybegood37 - Nov 17, 2013 12:41:16 GMT -6
Post by jonnybegood37 on Nov 17, 2013 12:41:16 GMT -6
cant get it to run over idle,as soon as i give it throttle just bogs down and dies ,replaced all vacuum lines, fuel filters,took carb checked jets ,fuel pump is working good , ?
|
|
New Student
Currently Offline
Posts: 7
A+'s: 0
Joined: Nov 16, 2013 11:00:32 GMT -6
|
hi all
by: jonnybegood37 - Nov 17, 2013 1:12:03 GMT -6
Post by jonnybegood37 on Nov 17, 2013 1:12:03 GMT -6
one of my friends give me vog260 ,to make long story short ,lol it was non running and very badly abused  so i kinda need help with vacuum line diagram ,this is very helpful site lots of info |
|
