New Student
Currently Offline
Posts: 6
A+'s: 0
Joined: Mar 11, 2013 10:56:26 GMT -6
|
Post by yella on Jul 9, 2014 21:16:39 GMT -6
Good question john. This thing is not doing much other than the headlights, horn, brakelights. . How can I check spark when it won't even crack? it seems like everything goes thru the ECU. Mike
|
|
New Student
Currently Offline
Posts: 6
A+'s: 0
Joined: Mar 11, 2013 10:56:26 GMT -6
|
Post by yella on Jul 6, 2014 20:56:22 GMT -6
Yeah your right I could probably by-pass the ECU for pump and starter but there is a Lot of other things that the ECU controls and monitors. Thanks for your input I wish I had a better (clearer) wiring diagram
|
|
New Student
Currently Offline
Posts: 6
A+'s: 0
Joined: Mar 11, 2013 10:56:26 GMT -6
|
Post by yella on Jul 6, 2014 19:42:57 GMT -6
Yes it's electric. The wires from pump go to a relay. The coil side of relay has 12 volts on one lead and looks like it needs a ground from ECU. I'm afraid they may have fried ECU. Any idea where I can get one cheaper than the prices I see on-Line? $575 is best I see
|
|
New Student
Currently Offline
Posts: 6
A+'s: 0
Joined: Mar 11, 2013 10:56:26 GMT -6
|
Post by yella on Jul 6, 2014 18:37:51 GMT -6
Alleyoop, thanks. I tried that. Starter does crank engine but won't start. I don't hear fuel pump and I also don't get the normal check engine light (Amber) that came on when I turn key to the on position
|
|
New Student
Currently Offline
Posts: 6
A+'s: 0
Joined: Mar 11, 2013 10:56:26 GMT -6
|
Post by yella on Jul 6, 2014 17:42:29 GMT -6
Yes was running but would stall occasionally.
|
|
New Student
Currently Offline
Posts: 6
A+'s: 0
Joined: Mar 11, 2013 10:56:26 GMT -6
|
Post by yella on Jul 6, 2014 9:31:07 GMT -6
I have a 2009 Cfmoto Echarm 150 with efi. It would occasionally stale when slowing for a light but start right back up. I took to a scooter repair shop and now it won't even start. When you turn on key the headlight comes on the horn will work, the directionals work and gauges will illuminate . Brake light also works. Nothing else happens. No fuel pump sound and no starter action. I tested kill switch and found no problem. Could this be a ECU issue. Does anyone have a good wiring diagram for the ECU pin outs? The one in the manual doesn't show up very good so I can't read it very we'll. I also checked the roll over switch and that is working fine too
|
|