Welcome Walter,
Good to have you on the forum, and nice to have a GY6 150 dealer. How are the shipping charges from there to here? I know the shipping charges from Canada is OUTRAGEIOUS usually more than the part your looking at. I made a mistake once ordered something and went to checkout and saw the shipping I backed out and removed it from the basket. I emailed the guy and there is nothing they can do its the import and export duties put on goods to and from there. They lower their prices quite a bit but still are way higher than anyone else not from Canada.
Again Welcome
Ride Safe
Alleyoop
List of mods on my trike:
Here is what my PST150H Ice Bear Trike currently has it was a 149.6cc Motor now it is 182cc motor:
62mm BBK
60mm Stroker Crank
16/37 Hoca Tranny Gears – Original were 13/40
K&N Air Filter with a Short Stack
SuperTrapp Muffler
1 1/4 Header Pipe
24mm Carb
#122.5 Main Jet
#38 Pilot Jet
Peformance Coil/CDI
NCY Performance Clutch&Bell
Manual Choke
Iridium Plug
Prodigy Variator
12g Dr. Pulley Sliders
205/65-10 Kenda Load Tires-3"s taller than OEM
29 tooth Drive Sprocket-came with 24 tooth.
DID 428 Pro V Series O-Ring Chain
Givia 29" tall Windshield
All Led bulbs Except the Headlights-I do not drive at night
4 way Flasher
Turn Signal Beeper
Relay for the Beeper connected to the Brakes
VIP Trunk with Led lights
Radio with Remote, SD card,MP3 connections