Brainstorm!!!!!! By Ernie (Read 604 times)

[Ernie]

I have been having a small problem with stalling when the electric enricher kicks out before the motor is sufficiently warmed up.

While taking my morning constitutional, I had a thought. It is my understanding that the electric enricher heats up a waxy gel of some sort using 12V and the needle is allowed to fall back into the off position.

If this occurs too soon, why couldn't I install a potentiometer or a resistor on the 12V line to reduce the voltage and slow down the enricher from turning off until the bike is warmed up?

Comments?

Ernie

[problemchild]

just put a new 1 on it thee cheap

[Ernie]

This is a new one!

[JR]

Some folks just simply put on a on/off toggle switch on the enricher and put it in the off position while warming up. After it warms up good then just flip it on where the enricher will shut off the extra fuel.

JR

[bhinch]

Hi guys and gals....I installed the manual choke mod on my scoot and it works great...everyday the temp and humidity have changed from the previous day...with the manual choke mod I can adjust the idle with the choke mod...not hard to install...just a different way to do the same thing...enjoy the ride..