Post by dm on Nov 9, 2022 16:51:43 GMT -6
So I looked through some threads and I cannot find exactly what I'm looking for. I'm also horrible with this internet stuff. So I have a 2015 kymco agility 50cc I swapped out to 150cc gy6. Got everything welded heck it even runs. I couldn't get wired into the original harness,a lot of problems. So I bought a new harness, actually just bought a second one. I just can't figure out what goes where. I figured out the 5 wire original ignition switch to a 4 wire plug, I think? There's an extra ground on the 5 wire so I just run the two as one right? Anyway I want all lights and gauges to work as they should and I don't know where to begin. I can't even find the controls that originally go to the wire harness online or I would just buy them but I can't. I'm around $1,500.00 in and I just don't know what to do. My original L.H. control is 8 wire, 2 plugs. 5 and 3 wire a piece. The new harness with all the wires to those controls, headlight, turn, and horn are 4 plugs. 3 wire plug for headlight, 2 three wire for turn, and 1 two wire for horn. 11 wire total. I have a new L H control that came with the first harness that is a 9 wire on 2 plugs that I could use but I have no idea where to start everything is a different color. There is also a big plug on the new harness that I'm using, midway with an 8 wire plug that has a jumper wire on it that I have no idea where it goes. I got $600 in a multi meter and power probe that I don't even know how to use. There's more but this post is long enough. I can't find the parts to buy and can't get any shops to reply to me so I can pay someone to do it. I'm completely at a loss here, any help would be greatly appreciated.