New Student
Currently Offline
Posts: 2 
A+'s: 0
Joined: Oct 27, 2017 19:16:24 GMT -6
|
Post by frankb on Oct 27, 2017 19:30:44 GMT -6
Just got this 50cc Q6 trike for my daughter. Putting it together with no problems until I got to the foot peg on right side. I can't for the life of me guess on why it will not open. The left side works fine but the right side only moves about 1/4 inch out. Can I remove the right side plastic foot rest without a bunch of parts coming lose . I just can't see what is keeping this from swinging out ward. Thanks for any help.
|
|
|
|
Post by cyborg on Oct 28, 2017 7:44:40 GMT -6
Hi I hate the maddening simple things,,,drives me crazier than I already am,,,,post a pic or two if you get a moment,,,and contact Jim at rapid repair,,,he has a ad scrolling at the top of the page,,,he knows all icebear,,,very knowledgable ,,,,he'll have the definitive answer
|
|
New Student
Currently Offline
Posts: 2
A+'s: 0
Joined: Oct 27, 2017 19:16:24 GMT -6
|
Post by frankb on Oct 30, 2017 4:35:01 GMT -6
Thank you for your help. I removed the plastic from bottom of foot board and still would not swing out. Finally used a long rod from other side and hit with a hammer to brake it lose. Working the way it should now.
|
|
|
|
Post by cyborg on Oct 30, 2017 7:16:08 GMT -6
Was it frozen with paint? Or just bound up?
|
|
