|
|
Post by richardthescooter3 on Feb 19, 2017 14:47:30 GMT -6
Hey guys, its been awhile, got a problem with a leaking brake caliper, leaking from the abs side where they are connected. changed out the o ring, but still leaking, where can i found the right o ring?
|
|
|
|
Post by cyborg on Feb 19, 2017 19:40:19 GMT -6
Is the abs unit leaking?
|
|
|
|
Post by cyborg on Feb 19, 2017 19:41:43 GMT -6
What I mean by that is it leaking from the banjo bolt or the caliper itself?,,, can you post a pic please?
|
|
|
|
Post by richardthescooter3 on Feb 19, 2017 20:54:50 GMT -6
Abs, when squeezing brake lever, it's leaking from the abs side where it's connected to the caliper.
|
|
|
|
Post by richardthescooter3 on Feb 19, 2017 22:03:18 GMT -6
I think the main problem is a leaking o ring that bolts up with the abs, banjo is good.
|
|
|
|
Post by cyborg on Feb 20, 2017 7:56:58 GMT -6
Is it the copper washer?,,,you can get those at any motorcycle parts store,,,,some auto parts stores have the smaller ones as well
|
|
|
|
Post by richardthescooter3 on Feb 20, 2017 15:58:26 GMT -6
Hey cyborg, no it's the rubber o ring, I took it a part clean and put back together and went through the process of bleeding the brakes again, and now no leaks and nice firm brake, thanks
|
|
|
|
Post by richardthescooter3 on Feb 20, 2017 16:25:38 GMT -6
Hey cyborg, banjo is Good and coppervwashers good, it was the O ring on the bolt that connects to the ABS, took it a part ag again and cleaned and re- position the O ring, bled brakes again thisctime no leaks, thanks
|
|
|
|
Post by cyborg on Feb 21, 2017 7:22:10 GMT -6
Great news glad you got it sorted out
|
|
|
|
Post by richardthescooter3 on Mar 7, 2017 17:14:16 GMT -6
Hey guys just discovered a small leak in may master cylinder, when I got this scooter it wàs in bad shape, had to drill this scews to get master cylinder lid off, now leaking around the screw, anyone have an extra lid laying around?
|
|
|
|
Post by richardthescooter3 on Mar 7, 2017 17:41:47 GMT -6
Got it stop, but I just want to make it safe
|
|
|
|
Post by cyborg on Mar 7, 2017 21:04:42 GMT -6
I'd recommend a new master,,, they're very inexpensive for a new one
|
|
|
|
Post by richardthescooter3 on Mar 7, 2017 21:14:39 GMT -6
Thanks. I'll check it out
|
|
|
|
Post by richardthescooter3 on Mar 7, 2017 22:13:44 GMT -6
The screws I had weren't the right ones, they were the only ones I had, so I got looking and came across the right master cylinder bolts, problem solved😎
|
|
