New Student
Currently Offline
VALVES
Posts: 23 
A+'s: 0
Joined: Dec 9, 2014 20:25:05 GMT -6
|
Post by rock71 on Aug 4, 2015 8:26:43 GMT -6
Hi experts, after changing the oil, my bike started making a strange noise when I accelerated and decelerated, metal tic tic inside motor, valves maybe??, Please some clue of what may be happening, any suggestions are welcome Thanks
Below the video.
|
|
Junior
Currently Offline
2008 Linhai Aelous 300. I ride it like I stole it.
Posts: 106
A+'s: 2
Joined: Aug 2, 2012 7:52:51 GMT -6
|
Post by bones113 on Aug 4, 2015 13:42:57 GMT -6
It don't sound like valves to me. Sounds like something maybe loose. Try draining your oil and see if there is any metal etc that comes out with the oil. There is a starter clutch, and other gears in there that could be loose. It is a strange sound for sure. The motor seems fine based on your video. You can take the side motor cover off and inspect the gears in there but order a new gasket set before you do or you can make your own. You will need it. To say what it really is is hard to figure.
|
|
New Student
Currently Offline
VALVES
Posts: 23
A+'s: 0
Joined: Dec 9, 2014 20:25:05 GMT -6
|
Post by rock71 on Sept 18, 2015 22:25:14 GMT -6
Well after dismount the exhaust and muffler, I could find that the noise was the gasket exhaust wasn't there....I put a new one and now is a silence maxiScooter =).
|
|
|
|
Post by JR on Sept 19, 2015 11:37:39 GMT -6
|
|
