New Student
Currently Offline
Posts: 7 
A+'s: 0
Joined: Jul 13, 2014 10:50:52 GMT -6
|
Post by oldbikerarlo on Aug 3, 2014 15:26:36 GMT -6
What would cause the starter clutch to come loose? I used an impact driver to install it. What would be the tourq spec for that nut.(
|
|
|
|
Post by alleyoop on Aug 3, 2014 15:56:56 GMT -6
Did you put the nut on with the bevel out, the flat side goes against the gear.
Alleyoop
|
|
Sophomore
Currently Offline
Posts: 67
A+'s: 0
Joined: Apr 8, 2012 4:24:33 GMT -6
|
Post by minesweeper on Aug 3, 2014 21:19:06 GMT -6
It takes a special tool on that nut and it's reverse thread. You still used an impact? Alley has the right idea, the bevel is critical. First the flat side of the washer goes in:
Then the nut just like Alley said:
Then this is how I tighten it, it is a soft nut, I hope you didn't damage it with the impact:
Even if you did you didn't hurt the crank with it's hard metal, you'd just need another nut......like Alley.
|
|
|
|
Post by alleyoop on Aug 3, 2014 21:36:41 GMT -6
|
|
..BAD TO THE BONE..
