New Student
Currently Offline
Posts: 4
A+'s: 0
Joined: Jun 12, 2012 7:44:54 GMT -6
|
Post by earlbuddy on Oct 22, 2013 17:56:56 GMT -6
I have a 50cc moped that I can't get gas to flow. I've adjusted the valves from .002 to .005. Still no flow. When I suck on the vacuum line gas flows easily. I've replaced the gas and vacuum lines, intake manifold, insulator, and o rings/gaskets. I checked the compression and get 215 which seems high. Anyone have any ideas? Thanks
|
|
|
|
Post by alleyoop on Oct 22, 2013 18:43:48 GMT -6
Have you checked the Plug after cranking it and see if it is wet or dry. It may not be the gas it may be no spark have you checked for spark.
The carbs Pilot jet could be clogged and nothing will come out. So checking the plug after cranking will tell you that. If dry after cranking without firing then NO gas is being sucked out of the carb, If wet then the plug is not firing.
Alleyoop
|
|
..BAD TO THE BONE..