Hey Jack By kz1000st (Read 571 times)

[kz1000st]

I happened to be flipping around the web and I saw this.

.amazon.com/dp/B00CR0T6UG/ref=dra_a_cs_mr_hn_it_P1400_1000?tag=dradisplay-20" rel="nofollow" target="_blank">.amazon.com/dp/B00CR0T6UG/ref=dra_a_cs_mr_hn_it_P1400_1000?tag=dradisplay-20

Would this work for a Linhai Yamaha Scooter? I know there are people who have diaphragm and other problem with the Chinese carbs. Would this Keihin work on yours?

[JR]

Yes it is more for the VOG type because the linkage bracket is a little different. But you can unbolt the linkage from the old carb and change it out. Now just like on the GY-6 engine some of these 250 carbs are a dime a dozen and if you need only a diaphragm it's easier and just as cheap to buy the whole carb:


.ebay.com/itm/Carburetor-Gy6-250cc-Carb-30mm-Moped-Scooter-Go-Kart-Carter-JCL-KinRoad-Roketa-/150694268560?pt=Motors_ATV_Parts_Accessories&hash=item2316140e90&vxp=mtr" rel="nofollow" target="_blank">.ebay.com/itm/Carburetor-Gy6-250cc-Carb-30mm-Moped-Scooter-Go-Kart-Carter-JCL-KinRoad-Roketa-/150694268560?pt=Motors_ATV_Parts_Accessories&hash=item2316140e90&vxp=mtr

My wife's 250 had a tiny hole in the diaphragm so small that it had just a minimum effect on it but I found that tiny hole. When shopping around I founds a special on a 250 carb that was as cheap as the diaphragm so heck I bought the whole carb. I had repaired the tiny hole with a touch of silicone but I felt better with the new diaphragm so when it came in I popped the top and replaced it with the new one from the new carb and put the repaired diaphragm in the new carb for a spare.

JR