Sophomore
Currently Offline
Ultimate LAD
Posts: 92 
A+'s: 1
Joined: Oct 10, 2013 15:36:57 GMT -6
|
Post by churchy on Oct 15, 2013 15:28:33 GMT -6
yup and i am not getting power to switch have ordered new one, when starter motor spins it should spin flywheel shouldnt it
|
|
|
|
Post by alleyoop on Oct 15, 2013 15:47:54 GMT -6
yup and i am not getting power to switch have ordered new one, when starter motor spins it should spin flywheel shouldnt it If your not getting power to the switch, what does that tell you? The problem is from the switch back to the battery right? So we keep telling you to check BOTH sides of the fuse for 12v from the battery. If the fuse is bad no power will get to the switch or the wire is broken someplace from the battery to the switch. The fuse's many times look good but they are not, it could be the fuse itself or the connectors that it touchs on both sides are bad and the fuse is not making good contact to allow the voltage to travel where it is needed. Alleyoop |
|
Sophomore
Currently Offline
Ultimate LAD
Posts: 92
A+'s: 1
Joined: Oct 10, 2013 15:36:57 GMT -6
|
Post by churchy on Oct 15, 2013 15:49:46 GMT -6
appologies, i meant from switch the is power TO the switch but not FROM.
Alley can you shed any light on the other thread?
|
|
|
|
Post by alleyoop on Oct 15, 2013 15:57:38 GMT -6
Ah, ok then yes the switch is not making contact with the black wire that then sends the voltage to the rest of the system.
Alleyoop
|
|
|
|
Post by alleyoop on Oct 22, 2013 11:15:30 GMT -6
Have you found the problem?
Alleyoop
|
|
Sophomore
Currently Offline
Ultimate LAD
Posts: 92
A+'s: 1
Joined: Oct 10, 2013 15:36:57 GMT -6
|
Post by churchy on Oct 24, 2013 10:45:38 GMT -6
ok so it was the switch replaced that but then the starter motor turned but the flywheel didnt so i cleaned up the starter clutch whitch did the trick
|
|
..BAD TO THE BONE..