|
|
Muffler bolt:
by: richardthescooter3 - Sept 8, 2013 6:35:21 GMT -6
Post by richardthescooter3 on Sept 8, 2013 6:35:21 GMT -6
Hi guys hope all is well. I lost my muffler bolt somewhere a long the way. Can someone tell be what size thread so I can buy one and how long this bolt this. Attachments:
|
|
|
|
Post by fflintstone on Sept 9, 2013 9:12:00 GMT -6
Hey richard,I looked for bolts,found some on Powersportsmax,,shows bolt sizes for flanges...don't know if this will help...didn't say which one is for muffler..good luck,fflintstone
|
|
|
|
Muffler bolt:
by: richardthescooter3 - Sept 9, 2013 10:03:27 GMT -6
Post by richardthescooter3 on Sept 9, 2013 10:03:27 GMT -6
;o Thanks fflintstone.
|
|
Sophomore
Currently Offline
Ride Safe Everyone
Posts: 76
A+'s: 0
Joined: May 13, 2013 17:31:51 GMT -6
|
Post by Barnie on Sept 9, 2013 17:52:28 GMT -6
Richard, you shuld be able to get a bolt at your local Ace hdwe or Do It Center. It will be metric and they can check the thread and depth for you. Barnie
|
|
|
|
Post by alleyoop on Sept 9, 2013 19:17:33 GMT -6
They are usually 6mm or 8mm so get one of each at least half inch long.
Alleyoop
|
|
|
|
Muffler bolt:
by: richardthescooter3 - Sept 11, 2013 7:23:06 GMT -6
Post by richardthescooter3 on Sept 11, 2013 7:23:06 GMT -6
Thanks Barnie & Alleyoop  Will check it out ;D |
|
|
|
Post by fflintstone on Sept 11, 2013 8:29:40 GMT -6
I just got a better look at your photo--it is the bolt holdiing the muffler on--it is probably 1 and 1/2" or 2 " long and 10 mil metric--good luck,fflintstone
|
|
|
|
Muffler bolt:
by: richardthescooter3 - Sept 11, 2013 10:01:29 GMT -6
Post by richardthescooter3 on Sept 11, 2013 10:01:29 GMT -6
Got one fflintstone  , its a 10mm with a 1.25 pitch. Now since I can't hear that good I'll have to keep an eye on it  |
|
|
|
Post by fflintstone on Sept 12, 2013 0:36:50 GMT -6
Got one fflintstone , its a 10mm with a 1.25 pitch. Now since I can't hear that good I'll have to keep an eye on it Kewl--good to know--happy trails,fflintstone |
|
..BAD TO THE BONE..