Sophomore
Currently Offline
Posts: 91
A+'s: 0
Joined: Jul 9, 2011 0:21:34 GMT -6
|
Post by chrispetty1 on Jun 28, 2013 9:58:05 GMT -6
do you have to remove the clutch and bell to remove the rear tire on a 50 cc qmb 139 scooter
|
|
|
|
Post by alleyoop on Jun 28, 2013 15:34:34 GMT -6
No, you take the Rear Tire off from the OTHER SIDE the muffler side and it slips off the Shaft that is connected to the CLUTCH on the other side.
Alleyoop
|
|
Sophomore
Currently Offline
Posts: 91
A+'s: 0
Joined: Jul 9, 2011 0:21:34 GMT -6
|
Post by chrispetty1 on Jun 28, 2013 17:42:34 GMT -6
i asked because its not wanting to come off
|
|
|
|
Post by alleyoop on Jun 29, 2013 0:06:35 GMT -6
How about some pictures of what you have done so far. Here is what a motor and the shaft that the wheel mounts onto: If your scoot has 10" wheels you have the SHORT CASE MOTOR, If you have 12" wheels you have the LONG CASE MOTOR. Alleyoop Here is the LONG CASE 139QMB motor:  Here is the SHORT CASE 139QMB motor:  |
|
Sophomore
Currently Offline
Posts: 91
A+'s: 0
Joined: Jul 9, 2011 0:21:34 GMT -6
|
Post by chrispetty1 on Jun 29, 2013 20:22:59 GMT -6
its a short case the problem is the rear wheel is not coming off for some reason its frozen in there and from what i can see it shouldn't be it turns but is gravlely like the bearings might be gone once i get it off ill know
|
|
|
|
Post by richardthescooter3 on Jul 2, 2013 9:44:14 GMT -6
You might want to put the axle nut back on and use a rubber hammer to hit the nut, that's what I had to do to break mine loose.
|
|
..BAD TO THE BONE..
