Sophomore
Currently Offline
Posts: 79
A+'s: 0
Joined: Feb 13, 2013 5:10:42 GMT -6
|
Post by beakeyozz on Apr 16, 2013 23:00:37 GMT -6
hello hope everyone is in good health l was told the correct torque for the nuts to the head is 21 lbs ft l just thought l would check here before l install the new head thx for everyone's help
|
|
|
|
Post by alleyoop on Apr 16, 2013 23:16:31 GMT -6
That is a little to much torque the head to 17-18ft lbs.
Alleyoop
|
|
Sophomore
Currently Offline
Posts: 79
A+'s: 0
Joined: Feb 13, 2013 5:10:42 GMT -6
|
Post by beakeyozz on Apr 17, 2013 0:07:50 GMT -6
thx alleyopp l thought it was a little to much
|
|
|
|
Post by tvnacman on Apr 17, 2013 13:56:25 GMT -6
Al is it the same for the 50's as the 150's ?
John
|
|
|
|
Post by tvnacman on Apr 18, 2013 5:08:07 GMT -6
Bump
|
|
Sophomore
Currently Offline
Posts: 79
A+'s: 0
Joined: Feb 13, 2013 5:10:42 GMT -6
|
Post by beakeyozz on Apr 21, 2013 2:02:34 GMT -6
it all went together nicely no problems shes idling gr8 and seems a lot smoother taking off and a little more power thx to everyone helping me with my questions it was certainly a big help and its all good thx again peoples
|
|
..BAD TO THE BONE..
