New Student
Currently Offline
Posts: 16
A+'s: 0
Joined: Sept 28, 2012 13:03:22 GMT -6
|
Post by ccortus on Mar 14, 2013 19:33:46 GMT -6
My new scooter. 2013 Bashan Peace B09R. Bought it brand new and took it to a guy who put a 100cc BBK on it. Runs 40mph easy, about half throttle. Not gonna take it over that until I'm sure it's broke in. Changing the oil this weekend and then maybe I'll open her up! Attachments:
|
|
New Student
Currently Offline
Posts: 16
A+'s: 0
Joined: Sept 28, 2012 13:03:22 GMT -6
|
Post by ccortus on Mar 15, 2013 13:18:19 GMT -6
So with this new set-up a larger carburetor was installed. It currently has a really cheap looking piece of foam attached to the intake of the carb for a filter. Any ideas on a filter that might work? It has to curve upwards almost immediately behind the carburetor.
|
|
|
|
Post by tvnacman on Mar 16, 2013 9:01:54 GMT -6
what about a pod filter ?
John
|
|
New Student
Currently Offline
Posts: 16
A+'s: 0
Joined: Sept 28, 2012 13:03:22 GMT -6
|
Post by ccortus on Mar 16, 2013 10:03:00 GMT -6
|
|
|
|
Post by tvnacman on Mar 16, 2013 10:13:48 GMT -6
I can beat that prise on my site for a like item .
John
|
|
New Student
Currently Offline
Posts: 16
A+'s: 0
Joined: Sept 28, 2012 13:03:22 GMT -6
|
Post by ccortus on Mar 19, 2013 16:16:24 GMT -6
Or is this filter good enough? Also have a leaky tire that is brand new. Looking for a decent quality replacement. Don't want to buy the same POS tire. Any suggestions? Attachments:
|
|
|
|
Post by terrilee on Mar 19, 2013 17:46:39 GMT -6
i wouldnt run that filter u have, but thats me
tires--some like Michelin or pirelli's (sp)
|
|
|
|
Post by justbuggin2 on Mar 19, 2013 21:31:43 GMT -6
change your valve stems that is the most likely place your tire is leaking and the china stems are not worth a sh**
|
|
New Student
Currently Offline
Posts: 16
A+'s: 0
Joined: Sept 28, 2012 13:03:22 GMT -6
|
Post by ccortus on Mar 21, 2013 3:31:46 GMT -6
The valve stems are good. I sprayed some soapy water on the tire. It's leaking out of three of the treads. Thanks everyone for all the help!
|
|
|
|
Post by alleyoop on Mar 21, 2013 19:51:17 GMT -6
If the tires are leaking in the threads they garbage at high speeds they may blow out.
Alleyoop
|
|
New Student
Currently Offline
Posts: 16
A+'s: 0
Joined: Sept 28, 2012 13:03:22 GMT -6
|
Post by ccortus on Mar 23, 2013 8:46:26 GMT -6
I ordered a Michelin tire. Shouldn't have to deal with this kind of stuff with a brand new scooter but I guess that's what you get when you buy a Chinese scooter. Should be up a running good in a week or two. Thanks for all the help. Does anyone have any opinions on windshields?
|
|
New Student
Currently Offline
Posts: 20 
A+'s: 0
Joined: Sept 15, 2013 18:41:52 GMT -6
|
Post by vantjohnsonjr on Sept 16, 2013 9:17:37 GMT -6
I ordered a Michelin tire. Shouldn't have to deal with this kind of stuff with a brand new scooter but I guess that's what you get when you buy a Chinese scooter. Should be up a running good in a week or two. Thanks for all the help. Does anyone have any opinions on windshields? How did the Michelin Tires work out? |
|
New Student
Currently Offline
Posts: 25
A+'s: 0
Joined: Apr 6, 2012 1:07:13 GMT -6
|
Post by prelude2fast on Sept 18, 2013 0:31:25 GMT -6
I have had really good luck with kenda k413 on my scooter.. Replaced both front and rear with those.. Really good traction, and last a good while.. Also only about 50 a tire.. So not up in price like Michelin or Pirelli.. Seem to be made really well.. I have a 1/4 mile gravel driveway to go up and down, and no problems yet..
|
|
..BAD TO THE BONE..
