Sophomore
Currently Offline
Posts: 77
A+'s: 0
Joined: Jun 7, 2012 20:55:49 GMT -6
|
Post by jburd on Oct 23, 2012 8:39:51 GMT -6
I have a JCL MP250a Linhai scooter that I recently overheated. I posted another thread about that. In the process of overheating it looks like I have screwed up the crankshaft bearing and will have to install a new crankshaft. I would like to do it myself and thanks to JR found a link to the part. I have been doing a lot of research online and find a lot of different methods to replacing the crankshaft and the motors they do it on are just as varied. Has anyone had to do this on this scooter and are there any good resources I could check out to make sure I do this right? Tips anyone?
|
|
|
|
Post by tvnacman on Oct 23, 2012 8:57:28 GMT -6
I've seen a video on you tube. The guy heated the case in the oven and put the crank in the freezer. When I get home tonight I can look for it and post a link.
John
|
|
Junior
Currently Offline
Posts: 138
A+'s: 0
Joined: Aug 7, 2012 8:24:21 GMT -6
|
Post by wheezy on Oct 23, 2012 9:44:29 GMT -6
I've seen a video on you tube. The guy heated the case in the oven and put the crank in the freezer. When I get home tonight I can look for it and post a link. Is it this one John? |
|
|
|
Post by tvnacman on Oct 23, 2012 11:12:59 GMT -6
I think it might be the one, the screen is small.
John
|
|
