|
|
Post by wolfhound on Jul 19, 2011 16:57:17 GMT -6
OK, Alley Oop and Rapid Jim, especially. where can I order the infamous missing bearing and the gaskit for my 09 IKB Ruckus
clone trike?? We are ready to tear into it but will need those
parts first.
|
|
|
|
Post by alleyoop on Jul 19, 2011 21:22:22 GMT -6
Well I did not order the Bearing, Jim Did but here is the bearing you need:
C3 #6004 Deep Groove Radial Ball Bearing. As far as the gasket Jim ordered the entire Engine Gasket set.
Alleyoop
|
|
|
|
Post by wolfhound on Jul 20, 2011 5:55:26 GMT -6
Tghanks, Alley. I will try to contact Jim today and order.
|
|
|
|
Post by alleyoop on Jul 20, 2011 18:04:59 GMT -6
Wolfhound,
And I have to tell you my REVERSE and FORWARD work without a HITCH. That Damn missing bearing it appears was allowing the Shaft to move in and out from the Gears meshing.
It goes into forward and reverse SOLID.
THANKS GO TO WILDMAN, he was the one that found that the problem was the MISSING SUPPORT Bearing for the Shaft but only after it ruined his tranny gears.
Alleyoop
|
|
|
|
Post by wolfhound on Jul 21, 2011 17:48:31 GMT -6
My thanks to all three of you guys. Placed my order with Jim today and we will get to work on
it next week when my dealer/mechanic returns from a group ride in MI..
|
|
|
|
Post by rapidjim on Jul 22, 2011 6:56:15 GMT -6
Thanks for the order Wolf. It has been forwarded to the warehouse.
Jim
|
|
|
|
Post by wolfhound on Jul 22, 2011 9:42:00 GMT -6
Thanks, Jim. Bryan will be back from a ride in MI by the middle of next week and we will
get to work on it right then. Will keep you all posted on the results.
|
|
..BAD TO THE BONE..
