|
|
Post by richardthescooter3 on Aug 1, 2012 7:58:23 GMT -6
Hey Guy's, installed new bulbs 35w/35w when in great, putting them in housing (well, that was a different animal altogether) but its done thank God  Attachments:
|
|
|
|
Post by richardthescooter3 on Aug 1, 2012 8:00:23 GMT -6
Putting this clip in was the hardest  And like always thanks for your help. Attachments:
|
|
Sophomore
Currently Offline
Posts: 78
A+'s: 0
Joined: Nov 24, 2011 6:22:45 GMT -6
|
Post by scootaway on Aug 1, 2012 8:21:52 GMT -6
That clip is a bugger man
|
|
|
|
Post by damin69 on Aug 1, 2012 10:56:18 GMT -6
Yup that clip is a Bugger. I drilled 2 tiny holes in mine to slide the wire into made it tons easier to put back in.
|
|
|
|
Post by richardthescooter3 on Aug 3, 2012 11:26:52 GMT -6
Good idea damin69 (thanks)
|
|
Sophomore
Currently Offline
Posts: 91
A+'s: 0
Joined: Jul 9, 2012 7:33:33 GMT -6
|
Post by robert1c on Aug 5, 2012 13:12:20 GMT -6
Yes those clips are a pain. I finally figured it out though. Loosen the screw about half a turn and with a pair of small pliers wiggle the bracket so that it slides up and left to right. Now you can slide one clip in. Now with a skinny flat head push slightly down and in on the side that is already clipped and the other clip will slide right in. Tighten and your done. I can do both bulbs in about 5 to 10 minutes now. I converted to H3s. Very nice and bright.
|
|
