Hi By jackie007 (Read 1,154 times)

[jackie007]

im jackie from uk i have a chinese 50cc scooter n need help with the wireing so to disconnect the alarm/immobilser

[JR]

Welcome to the forum Jackie007. Now are the female version of bond007?

OK tell me what brand and model of 50cc scooter you have and we'll figure it out. Some alarm systems is just a matter of unplugging and that's it but some need a jumper wire, either way we'll get it done.

Hope the weather is pretty on the other side of the pond and if you're getting any rain then send it my way!

JR

[jackie007]

its a hanglong 50cc scooter not sure on model but its a box behind the front panel hope that helps

[JR]

Ok Jackie here is a picture of a hangalong I found and it looks like one of the typical Chinese models around;



Now I'm going to move this post to the 50cc section so we can fix this scooter.

JR

[JR]

So let me ask you, do you have some of the plastics off the scooter where you can access the plug to the remote? If so then can you tell me the colors of the wires on this plug or even send a picture with the colors. If it's the typical Chinese harness then I can tell you what you need to do but I've got to have this information.

Also can you look at the manufacturer tag and tell me who makes this scooter and the tag may have a model number also and one last question, do you have a manual with it and does it have a wiring diagram?

JR

[jackie007]

thx yeah thats it aparently bloke i know got it running now just sorting indicators out n yes we are getting rain n lots of it wayyyyy to much your welcome to it yeah an alternative bond girl haha
thx muchly for your help i just excited and want me scooter up n running

[jackie007]

all i know from logbook is hanglong n dont have manual or wiring diagram which i will aim to get from somewere eventually not much known about it up to yet like i say the scooter now running i think without alarm just waiting for indicators to be wired up be good if you could tell me were i will get a manual for it thx

[JR]

Did some research and this scooter like a lot of Chinese scooters has little or no manual or wiring diagram support. Even if they include one with the scooter it's in what we call here Chinglish and is not much help.

Your best bet to have any helpful information is to use our generic type manuals they have a lot of good helpful information and most gererally apply to a broad range of Chinese scooters.

thescooterprofessor.proboards.com/index.cgi?board=misc&action=display&thread=752

Now when you say indicators working I presume you're refering to the instrument cluster and the gauges?

JR

[gatekeeper]

Over there when they say indicators they are usually referring to the turn signal lights I think.

[justbuggin2]

yea and they drive on the wrong side of the road

[tvnacman]

Jul 10, 2012 21:54:44 GMT -6 justbuggin2 said:

yea and they drive on the wrong side of the road

Have you been to NYC the cabs will drive anywhere , there is no right or wrong side of the road . They will go anywhere either side .

John

[justbuggin2]

yes twice i left the driving to the bus drivers and stayed in Jersey

[tvnacman]

I ride in NYC daily , it can be a challange

[blitztek]

unplug it, and if your kill switch/key switch doesn't kill the bike, short the pink and black/white wires together and see if it does then