New Student
Currently Offline
Posts: 20
A+'s: 0
Joined: Nov 10, 2011 13:48:44 GMT -6
|
Post by tinatinu on Nov 13, 2011 12:44:56 GMT -6
Ok that's good we know we have voltage to the CDI and if it's almost 12 volts then check and make sure your battery is charged well, you need 12.5 to 13 volts for a good battery. Ok next step is to see if we have a voltage output to the coil. So you may need to get a helping hand to do this test. You will need to do the following: (1) Turn on key (2) Press brake handle (3) take volt meter and put one lead on the black/yellow at the coil and the other lead to green (ground) (4) hit the start button and turn the engine over a bit and take a voltage reading. Now report back and let me know what it reads. Now sometime it takes me a little bit to get back, I just got home from Church and my wife and I are doing some early Christmas shopping this evening but I always check in on the forum and answer or post sometimes late into the night so don't give up on me because I promise I'll answer. Again let me know what this reading is and we'll go from there. JR They dont have Volt out, sir. I go to the Church every sunday too. Thanks for your helping me. Coleon. Can i chat with you on yahoo mess ? |
|
New Student
Currently Offline
Posts: 20
A+'s: 0
Joined: Nov 10, 2011 13:48:44 GMT -6
|
Post by tinatinu on Nov 13, 2011 9:03:08 GMT -6
Ok next step is to see if we have voltage to the CDI and other things? Now I really need to know which engine because it does make a difference on which wiring diagram we use so let me know? Now we can see if you have voltage to the CDI no matter what engine it is. You have 5 wires going into the CDI and they are as follows; black green red/white gray/white black/yellow So now I need you to get your volt meter out and turn the key on and then check the black wire to see if it has 12 volts DC or more. Touch one lead to the black wire in the plug and the other to the green wire again with the key on and get back with us. JR good morning sir, Black and green almost 12V, sir. What do i do next sir ? Thanks. |
|
New Student
Currently Offline
Posts: 20
A+'s: 0
Joined: Nov 10, 2011 13:48:44 GMT -6
|
Post by tinatinu on Nov 12, 2011 22:26:54 GMT -6
Ok next step is to see if we have voltage to the CDI and other things? Now I really need to know which engine because it does make a difference on which wiring diagram we use so let me know? Now we can see if you have voltage to the CDI no matter what engine it is. You have 5 wires going into the CDI and they are as follows; black green red/white gray/white black/yellow So now I need you to get your volt meter out and turn the key on and then check the black wire to see if it has 12 volts DC or more. Touch one lead to the black wire in the plug and the other to the green wire again with the key on and get back with us. JR can you check it for me, please ? i take a pic send u see that. picasaweb.google.com/115393757525557417364/November122011?authuser=0&feat=directlinkwould you mind take a look with my pic ? thank you for your helping me. tinatinu |
|
New Student
Currently Offline
Posts: 20
A+'s: 0
Joined: Nov 10, 2011 13:48:44 GMT -6
|
Post by tinatinu on Nov 12, 2011 21:16:09 GMT -6
yes that is. i mistake with that. i wrote wrong DC with AC. i have that is look like the link you send me. can you help me with my problem, sir ? thank you for your help. tinatinu |
|
New Student
Currently Offline
Posts: 20
A+'s: 0
Joined: Nov 10, 2011 13:48:44 GMT -6
|
Post by tinatinu on Nov 12, 2011 20:22:20 GMT -6
hello everyone,
iam new member, iam Tinatinu, iam 32years old. i live in Boston.
Nice to meet everyone here.
i have a problem, i hope everyone help me. Iam appreciate for your help.
I have roketa 250cc- Mc54, when i plug in AC CDI, it came out the sound and no spark. can anybody give me advice about this problem ?
Thanks you for your helping me.
Appreciate.
Tinatinu
|
|
New Student
Currently Offline
Posts: 20
A+'s: 0
Joined: Nov 10, 2011 13:48:44 GMT -6
|
Post by tinatinu on Nov 10, 2011 15:37:12 GMT -6
Hello everyone,
i need schematic Roketa 250cc-m54.does anyone have it ?
Thank you for your help.
Appreciate.
|
|
