New Student
Currently Offline
Posts: 17 
A+'s: 0
Joined: Jun 24, 2014 19:41:46 GMT -6
|
Post by coleman on Jun 26, 2014 18:00:54 GMT -6
Floats and that pin moves freely as I can tell.
|
|
New Student
Currently Offline
Posts: 17
A+'s: 0
Joined: Jun 24, 2014 19:41:46 GMT -6
|
Post by coleman on Jun 26, 2014 17:19:13 GMT -6
The hose at the top. It's cut at a 45 degree angle.
|
|
New Student
Currently Offline
Posts: 17
A+'s: 0
Joined: Jun 24, 2014 19:41:46 GMT -6
|
Post by coleman on Jun 26, 2014 16:04:51 GMT -6
Changed back to the original carb. Did the screw as you said. Still not turning over. I will try to get pics up. I know I'm getting gas. When I try to start it gas is coming out of the overflow tube.
|
|
New Student
Currently Offline
Posts: 17
A+'s: 0
Joined: Jun 24, 2014 19:41:46 GMT -6
|
Post by coleman on Jun 25, 2014 22:15:28 GMT -6
I hope we can get it running soon.
|
|
New Student
Currently Offline
Posts: 17
A+'s: 0
Joined: Jun 24, 2014 19:41:46 GMT -6
|
Post by coleman on Jun 25, 2014 22:14:59 GMT -6
Yes I have spark. Like I said, it runs if I flood it. Just won't stay running or start back up.
|
|
New Student
Currently Offline
Posts: 17
A+'s: 0
Joined: Jun 24, 2014 19:41:46 GMT -6
|
Post by coleman on Jun 25, 2014 22:02:15 GMT -6
I'm more determined to fix it rather than sell!!!!!!
|
|
New Student
Currently Offline
Posts: 17
A+'s: 0
Joined: Jun 24, 2014 19:41:46 GMT -6
|
Post by coleman on Jun 25, 2014 22:01:45 GMT -6
I'm more determined to fix it rather than sell!!!!!!
|
|
New Student
Currently Offline
Posts: 17
A+'s: 0
Joined: Jun 24, 2014 19:41:46 GMT -6
|
Post by coleman on Jun 25, 2014 22:01:08 GMT -6
Yes. Tank is in the back above carb. I will try the screw tomorrow. I'm close I can feel it. If not I'll have to sell it. I won't pay 80 bucks an hour for somebody to work on it.
|
|
New Student
Currently Offline
Posts: 17
A+'s: 0
Joined: Jun 24, 2014 19:41:46 GMT -6
|
Post by coleman on Jun 25, 2014 21:52:33 GMT -6
Fuel was pumping out. Would that screw stop it from starting completely?
|
|
New Student
Currently Offline
Posts: 17
A+'s: 0
Joined: Jun 24, 2014 19:41:46 GMT -6
|
Post by coleman on Jun 25, 2014 21:43:01 GMT -6
Fuel pump maybe?
|
|
New Student
Currently Offline
Posts: 17
A+'s: 0
Joined: Jun 24, 2014 19:41:46 GMT -6
|
Post by coleman on Jun 25, 2014 21:32:07 GMT -6
Cleaned just how you instructed and nothing changed. I twisted the throttle as I sprayed the cleaner. It poured out of those time holes. Put the carb back on and it fired up. It ran for about 20 seconds and it shut down.
|
|
New Student
Currently Offline
Posts: 17
A+'s: 0
Joined: Jun 24, 2014 19:41:46 GMT -6
|
Post by coleman on Jun 25, 2014 19:32:23 GMT -6
Kill switch is frozen. Doesn't operate anyhow. The scoot sat in the elements for two years unprotected.
|
|
New Student
Currently Offline
Posts: 17
A+'s: 0
Joined: Jun 24, 2014 19:41:46 GMT -6
|
Post by coleman on Jun 25, 2014 14:39:30 GMT -6
What if I can't re connect the black/white wire? Is that a big deal?
|
|
New Student
Currently Offline
Posts: 17
A+'s: 0
Joined: Jun 24, 2014 19:41:46 GMT -6
|
Post by coleman on Jun 25, 2014 14:37:35 GMT -6
I will give this a shot tomorrow!!!!!! I pray this works!!! I wish I would have found this before I got cut crazy!
|
|
New Student
Currently Offline
Posts: 17
A+'s: 0
Joined: Jun 24, 2014 19:41:46 GMT -6
|
Post by coleman on Jun 25, 2014 14:20:04 GMT -6
The scooter I got sat for two years. I cleaned up the gas tank and the carb. I ran new fuel lines and all. It will turn over but not start. I can start it if I flood the carb but it won't run long. It will run if I hook the vaccume line up to the gas line, but not for long. I can loosen the drain screw and see that I'm getting gas to my carb but it won't start. I have to flood it to start it. It won't stay running but a few seconds. I'm at a loss. I was told it was my kill switch. I cut the black/white wire and taped it off. The only other wore I had was a green one. I've tried green to green and looped them. The same with red yellow to green loop. I don't know why it won't start. The carb it clean!!!!!! I'm frustrated and need this for work. It's a bashan 150 racer.
|
|
