New Student
Currently Offline
Posts: 4
A+'s: 0
Joined: May 14, 2013 13:48:18 GMT -6
|
Post by woodydel on Nov 11, 2013 21:41:05 GMT -6
Go back and read my first post. I'm not a wise ass.
Engine type DOES NOT MATTER. The gauge is the same.
I did not ask for opinions about accuracy.
I did not ask about temp gauges.
You came at ME . Not the other way around.
IT'S FIXED WITHOUT YOU. No thank you for NOTHING.
Go ahead and circle the wagons.
Read my ORIGINAL POST. Your initial responses were all B.S..
|
|
New Student
Currently Offline
Posts: 4
A+'s: 0
Joined: May 14, 2013 13:48:18 GMT -6
|
Post by woodydel on Nov 5, 2013 19:14:18 GMT -6
FUEL GAUGE AND FUEL LEVEL SENDING UNIT---
I DID NOT STATE THE GAUGE STOPPED "ALL OF A SUDDEN". It has ALWAYS been inaccurate since I bought it new.
I took it apart when I tried to top off the gas and it was full and gauge needle laid flat on the bottom. I ignored the inaccurate gauge for too long.
I've purchased a new sending unit $22 and a complete NEW dash for $25. Speedometer in MPH, inaccurate or not, just will look "normal".
I've got 4 motorcycles, cars, trucks, 2 forward control jeeps, 27 garden tractors and a motorhome. I know how everything works.
This thing is Chinese (runs fine for 5 years) but there is NOTHING to look up. No stinking manuals except for Honda manuals which I use and CFMOTO manuals.
I'll do this the dumbass way and replace parts indiscriminately and it will work.
It's not worth messing with it and I just want to get the jackass panels back on before I forget how or lose the screws and bolts.
Thanks for your time. I'm taking care of it.
|
|
New Student
Currently Offline
Posts: 4
A+'s: 0
Joined: May 14, 2013 13:48:18 GMT -6
|
Post by woodydel on Nov 5, 2013 15:56:40 GMT -6
This is a scooter specific website so it sure seemed a YY250T would be recognized in my post. YY250T's are mentioned all over the site. That's my model number YY250T made by Jonway. The gauge on the dash stopped functioning altogether. It's either the gauge or the sender. What readings should I expect on the three wire plug at the sender? Anyone else?
|
|
New Student
Currently Offline
Posts: 4
A+'s: 0
Joined: May 14, 2013 13:48:18 GMT -6
|
Post by woodydel on Nov 5, 2013 13:33:22 GMT -6
I'm reasonably sure it must be here but searching hasn't helped me. I have YY250T and need to test sender. If there is a test for the gauge itself that would be of interest. Scooter panels are off and I have access to plug.
|
|
