New Student
Currently Offline
Posts: 4
A+'s: 0
Joined: Feb 2, 2013 22:55:03 GMT -6
|
Post by elcorn on Feb 3, 2013 22:45:18 GMT -6
my switch is different its all seperate and i ohmed it out and its good the headlight hi-lo is anyway
|
|
New Student
Currently Offline
Posts: 4
A+'s: 0
Joined: Feb 2, 2013 22:55:03 GMT -6
|
Post by elcorn on Feb 3, 2013 16:45:13 GMT -6
I just realized that the dash lights don't work as well all the rear lights work (brake & turn) I do have a meter but dont know how to use it very well all the switches are separate. Is there a fuse that would control only the headlights left turn and dash lights?
|
|
New Student
Currently Offline
Posts: 4
A+'s: 0
Joined: Feb 2, 2013 22:55:03 GMT -6
|
Post by elcorn on Feb 3, 2013 11:42:22 GMT -6
I checked and it seems there all separate switches and all wires look intact and plugged into switches well. Is there a way to check switches?
|
|
New Student
Currently Offline
Posts: 4
A+'s: 0
Joined: Feb 2, 2013 22:55:03 GMT -6
|
Post by elcorn on Feb 2, 2013 23:12:23 GMT -6
I have a jmstar 150. The headlights and the right turn signal just went out. the only thing new is it was dropped on its side and and also I changed the battery and a few of the connectors for the battery and ground wires. I did all these things and then when i started it back up the lights and right turn signal did'nt work. Oh and i also reconnected my horn. I've checked all my connections and fuses that I know of and all look good. Any ideas?  |
|
