New Student
Currently Offline
Posts: 1
A+'s: 0
Joined: Aug 11, 2018 16:38:12 GMT -6
|
Post by katrina on Aug 11, 2018 16:44:14 GMT -6
I have a qlink legacy 250 and my husband rebuilt the carb after it died on me, and now he can get it started, but once you let off the throttle it dies. Any ideas? He's at a loss... Or is there a link to a repair manual for this bike anywhere? Thanks!
|
|
|
Post by cyborg on Aug 13, 2018 7:26:12 GMT -6
Try setting the idle adjustment screw to have a higher idle,,,if that does it but the idle is too high then I'm afraid the carb needs to come off again ,,and inspect it for debris in the Jets ,,all of them and blast it with a good carb cleaner,,,also check the diaphragm for pin holes or small tears ,,any small hole or tear will cause a erratic or no idle
|
|