LINHAI 257 gear box bearing replacement help please. By 2stroked (Read 405 times)

[cyborg]

Not good to be seeing metal,,,,if it were me I'd pull it apart ,,,measure everything and get either timkin or Fag bearings,,,I would not run Chinese ,,,just my opinion

[JR]

Very rare this scooter needs tranny work 2stroked , of all the ones I've seen over the years only one I know of has had transmission problems. It's sister engine however has had lot's of shaft issues.

This site has a great supply of bearings and I'm betting if you pull it apart you will see the specs and match them here?

.scooterpartsexpress.com/bearings-bolts" rel="nofollow" target="_blank">.scooterpartsexpress.com/bearings-bolts

These guys sell the output shaft and lot's of bearings, betting they have them?

.partsforscooters.com/122-23-VOG-260-Clutch-Output-Shaft?sc=38&category=150049" rel="nofollow" target="_blank">.partsforscooters.com/122-23-VOG-260-Clutch-Output-Shaft?sc=38&category=150049

But I'm on board with cyborg here. I replaced all my wheel bearings on my scooters with good American bearings and they were easy to match at a good bearing place and in some auto parts.

JR

[JR]

Put the ceramic bearings in hot oil the case and or shaft they gone on in the freezer and they'll go on very easy.

JR

[cyborg]

I'll bet $50 they put engine oil in there ( the idiots)