|
|
Post by o0ohakko0o on Sept 11, 2015 21:13:32 GMT -6
Ok JR got the flywheel off not a problem here is the woodruff key PERFECT CONDITION.   |
|
|
|
Post by JR on Sept 11, 2015 21:29:40 GMT -6
Yes it is so I know this was a lot of work but put it back together and make sure it's aligned on the key slot and tight, this is not the problem.
If we don't have any luck with the carb then the next step is to check the valves and rings. Like you said we'll not let it beat us.
JR
|
|
|
|
Post by o0ohakko0o on Sept 11, 2015 22:11:12 GMT -6
Ok JR all put back together all the timing matches up just have to buy a carby now ok most probably be on monday
|
|
|
|
Post by o0ohakko0o on Sept 11, 2015 23:32:20 GMT -6
Ok JR i just gave my old carby a realy good clean out just thought id try and see what happened put it all back together and back on and tries to start still no luck BUT when i sprayed carby cleaner down the carby and tried to start it it was backfiring out where the air filter attaches to also sprayed some fuel down the spark plug hole and she was backfiring in the chamber ? has not backfired like this before since today also I spoke to my sister and she said the quad stopped because of wiring and in total the bike hasn't been started for the last 3/12 yrs
|
|
|
|
Post by JR on Sept 12, 2015 6:03:42 GMT -6
OK that makes me more hopeful of the carb solving the problem. The just stopping of course can be from several things but with it being electrical then the hope is the engine is A-OK. But the sitting isn't good on it. I would go ahead and change the oil and then let's hope the new carb is the answer.
If we have the same results then I'm leaning heavily on a non-seating partially stuck valve and that's not a hard thing to fix and you'll only need a gasket or two to fix this. We might want to actually just for kicks look for a video on removing the head on this engine.
|
|
|
|
Post by o0ohakko0o on Sept 12, 2015 21:46:37 GMT -6
The oil was very bad (black as) JR what oil should I use and does it have to be motorcycle oil or can it be 10w40 car oil ?
|
|
|
|
Post by JR on Sept 12, 2015 22:44:30 GMT -6
10W/40W auto oil will work fine.
|
|
|
|
Post by o0ohakko0o on Sept 12, 2015 22:54:04 GMT -6
Ok JR thanks and I just tested 3 brand new coils with my multimeter set to 200ohms and they are all coming back with 00.6 ? Also tested a 4th one and the reading has come back with 01.7
|
|
|
|
Post by tvnacman on Sept 13, 2015 17:35:47 GMT -6
tvnacman.blogspot.com/But someone ought to tell that guy to PUT ON THE EXHAUST SYSTEM otherwise it WILL NOT HAVE A CHANCE TO START nothing but BACKFIRES and damage to his exhaust valve.
|
|
|
|
Post by o0ohakko0o on Sept 14, 2015 5:02:38 GMT -6
All back together exhaust etc just waiting on a carby should have it by Thursday also ordered some gaskets incase the head has to come off
|
|
|
|
Post by o0ohakko0o on Sept 15, 2015 3:29:00 GMT -6
Jr you know what I have just realised , with my new break light switch I have the wiring connected but just not put back into the break as of yet but when I push the switch in I'm not able to start the bike but when I ain't pushing the switch in the bike will turn over soooo if it's connected into the break and I have the break pulled in it ain't going to turn over ?? It's like it's in reverse if you know what I mean
|
|
|
|
Post by tvnacman on Sept 15, 2015 3:50:01 GMT -6
Jr you know what I have just realised , with my new break light switch I have the wiring connected but just not put back into the break as of yet but when I push the switch in I'm not able to start the bike but when I ain't pushing the switch in the bike will turn over soooo if it's connected into the break and I have the break pulled in it ain't going to turn over ?? It's like it's in reverse if you know what I mean it will work it is normal. John |
|
|
|
Post by o0ohakko0o on Sept 15, 2015 19:31:59 GMT -6
Ok just put on new carby without any adjustments but she still does not want to start ? there was a tapping sound that came on and off where the valves are while trying to start it ? you think i should again adjust the valves
|
|
|
|
Post by tvnacman on Sept 16, 2015 3:32:56 GMT -6
|
|
|
|
Post by o0ohakko0o on Sept 16, 2015 3:45:40 GMT -6
Has not ran for like 3 yrs jr and I rewired the quad and we are in step by step process John
|
|
