New Student
Currently Offline
Posts: 37 
A+'s: 0
Joined: Dec 6, 2013 11:56:01 GMT -6
|
Post by racerx125 on Dec 6, 2013 12:05:20 GMT -6
Ok recently my horns gave out on my Icebear MC250rtc SX-R motorcycle so I took em off, but I forgot to tie down the wires and so the wires touched the exhaust which eventually burned my harness. So Now I i'm having trouble going to school because my motorcycle is dead on the water. Does anyone know where I can find a harness for it? Or anything similar harness that I can fit into it?
|
|
|
|
Post by JR on Dec 6, 2013 12:14:18 GMT -6
 Click on the RapidJim banner on top of the forum when it comes up. Jim is a Icebear man, he'll help you out. JR
|
|
New Student
Currently Offline
Posts: 37
A+'s: 0
Joined: Dec 6, 2013 11:56:01 GMT -6
|
Post by racerx125 on Dec 6, 2013 12:25:43 GMT -6
Ok, many thanks JR I will try and send him an email I hope he has one
|
|
New Student
Currently Offline
Posts: 37
A+'s: 0
Joined: Dec 6, 2013 11:56:01 GMT -6
|
Post by racerx125 on Dec 11, 2013 13:25:31 GMT -6
So it appears no one from Ice bear recognizes this motorcycle so now I have a 2012 Chinese brand motorcycle on my backyard rusting away due to burned harness. lol
|
|
|
|
Post by alleyoop on Dec 11, 2013 13:55:59 GMT -6
Just buy some good guage wire and replace the burned wires ONE AT A TIME do not tear the wire harness off.
You can go to a hardware store and buy the wire and connectors.
Alleyoop
|
|
..BAD TO THE BONE..