New Student
Currently Offline
Posts: 4
A+'s: 0
Joined: Oct 26, 2012 13:46:07 GMT -6
|
Post by mfr666 on Nov 14, 2012 4:12:16 GMT -6
I have a tank 150. The ligts do not work, no headlight,tail light, or instrument. Blinkers work, if i hold "bright" button i have high beam headlight, brake light works when brake applied, but no tail light.
Help!
|
|
|
|
Post by JR on Nov 14, 2012 7:37:25 GMT -6
Welcome to the forum!  On the tank scooters typically the head. tail and instrument lights run off of the same circuit feed wire which ties in off of the yellow wire on the R/R. If the scooter is charging (check the battery with volt meter with engine revved) then it's obvious you've had a main feed wire to these lights either break or become disconnected. The passing switch is a 12Vdc feed straight from the battery and when engaged will turn on the high beam head lights only. Need to strip off the plastics to find the R/R and trace the yellow output wire off of it until it comes to the light feed wire (usually brown) and see if it's all making good connection. Keep us informed we are here to help. JR |
|
New Student
Currently Offline
Posts: 4
A+'s: 0
Joined: Oct 26, 2012 13:46:07 GMT -6
|
Post by mfr666 on Nov 14, 2012 9:32:29 GMT -6
Thank you for your help! So- its probably not the ground, but rather the power line huh?! I guess I know what I'll be doin LOL
|
|
|
|
Post by JR on Nov 14, 2012 19:42:38 GMT -6
Since all 3 lights are out and on the same wire I would say no to the ground but if you find nothing wrong on this wire then the ground would be the next wire to check.
JR
|
|
