|
|
Post by damin69 on Apr 11, 2012 18:16:12 GMT -6
That is the Diode you need that Cruiser posted. Cruiser and I both have actually eliminated this Diode and went with and Actual Relay on our scooters to help improve the charging system.
|
|
|
|
Post by cruiser on Apr 11, 2012 19:57:49 GMT -6
|
|
New Student
Currently Offline
Posts: 49
A+'s: 0
Joined: Mar 30, 2012 10:06:06 GMT -6
|
Post by ronscycle1 on Apr 12, 2012 12:04:17 GMT -6
and where do i get this relay ?
|
|
|
|
Post by damin69 on Apr 12, 2012 13:07:46 GMT -6
|
|
New Student
Currently Offline
Posts: 49
A+'s: 0
Joined: Mar 30, 2012 10:06:06 GMT -6
|
Post by ronscycle1 on Apr 12, 2012 15:59:15 GMT -6
how do i know what wire goes where on that 4 prong relay
|
|
|
|
Post by damin69 on Apr 12, 2012 19:32:34 GMT -6
how do i know what wire goes where on that 4 prong relay Just follow the instruction in the Link that Cruiser provided above. |
|
New Student
Currently Offline
Posts: 49
A+'s: 0
Joined: Mar 30, 2012 10:06:06 GMT -6
|
Post by ronscycle1 on Apr 12, 2012 19:56:20 GMT -6
wont the lights come on when i turn on the key with the relay instead of diode?
|
|
|
|
Post by cruiser on Apr 12, 2012 20:56:11 GMT -6
wont the lights come on when i turn on the key with the relay instead of diode? Yes. |
|
|
|
Post by JR on Apr 13, 2012 4:48:59 GMT -6
The relay eliminates the diode, yes the lights will come on with just the key on , but it actually gives the system a little more charging amps too. That's why lots of people are doing this on the CFMoto version of this scooter.
JR
|
|
New Student
Currently Offline
Posts: 49
A+'s: 0
Joined: Mar 30, 2012 10:06:06 GMT -6
|
Post by ronscycle1 on Apr 13, 2012 12:43:52 GMT -6
damin69 says to get a 30 amp relay from auto zone will this work ?
|
|
|
|
Post by cruiser on Apr 13, 2012 14:19:03 GMT -6
damin69 says to get a 30 amp relay from auto zone will this work ? Yes. |
|
New Student
Currently Offline
Posts: 49
A+'s: 0
Joined: Mar 30, 2012 10:06:06 GMT -6
|
Post by ronscycle1 on Apr 13, 2012 17:54:04 GMT -6
on the regulator can i check the out put by disconnecting the red wire from the couple on the regulator side of the harness and check the DC voltage by connecting a volt meter to the red wiire and batt ground
|
|
|
|
Post by JR on Apr 13, 2012 20:10:22 GMT -6
Yes but it isn't necessary. Just put the leads on the battery posts and check it at idle and at say 4000 rpm.
JR
|
|
New Student
Currently Offline
Posts: 49
A+'s: 0
Joined: Mar 30, 2012 10:06:06 GMT -6
|
Post by ronscycle1 on Apr 21, 2012 15:47:31 GMT -6
got the new banjo oil passage bolt in today, that fits on the oil pipe , large bolt front lower oil pipe fitting at the front lower right engine case, but its shorter than the stock one ,I ordered it from honda will this still work ?
ordered it for a Honda cn 250 2007 part number 90002-km1-000
|
|
New Student
Currently Offline
Posts: 49
A+'s: 0
Joined: Mar 30, 2012 10:06:06 GMT -6
|
Post by ronscycle1 on Apr 22, 2012 19:59:27 GMT -6
can i even order parts like that oil pipe fitting large bolt from a china?
|
|
