Post by alleyoop on Sept 14, 2011 16:48:55 GMT -6
Hi Troops,
As you can see on my Trike I have a VIP TRUNK with LED Lights.
The two red lens on each side are Turn Signals.
The Spoiler has TWO functions one Running Lights that Light up 2 at a time from Center to the outside as your riding. When you Press the Brake they stop the moving from center to the side and all come on and stay on with the Brake applied.
Ok it is controlled by a little Control Board and the Spoiler lights have gone out on me. I have juice going to the board from the Brake and Running lights.
I took the damn thing off and took it to radioshack and he looked at the little board and said here is your problem. On the board the circuit that feeds the Spoiler is right on the edge of the board and part of the circuit was damaged. He checked continuity and sure enough none going to pins for the Spoiler. He cut me a piece of wire and told me to Solder a s piece of wire from an existing solder point on that circuit to where the circuit tied into the connector. I did but still nothing the lights do not come on the spoiler.
I have GOOGLED for the VIP CONTROL BOARD for this Trunk with no luck. I found one but they only sell them to people that BOUGHT THE TRUNK from them???
If anyone has a clue I would appriecate it. If you want i can take a picture of the Setup. Not a problem I have taken the damn thing off many times already.
Alleyoop
As you can see on my Trike I have a VIP TRUNK with LED Lights.
The two red lens on each side are Turn Signals.
The Spoiler has TWO functions one Running Lights that Light up 2 at a time from Center to the outside as your riding. When you Press the Brake they stop the moving from center to the side and all come on and stay on with the Brake applied.
Ok it is controlled by a little Control Board and the Spoiler lights have gone out on me. I have juice going to the board from the Brake and Running lights.
I took the damn thing off and took it to radioshack and he looked at the little board and said here is your problem. On the board the circuit that feeds the Spoiler is right on the edge of the board and part of the circuit was damaged. He checked continuity and sure enough none going to pins for the Spoiler. He cut me a piece of wire and told me to Solder a s piece of wire from an existing solder point on that circuit to where the circuit tied into the connector. I did but still nothing the lights do not come on the spoiler.
I have GOOGLED for the VIP CONTROL BOARD for this Trunk with no luck. I found one but they only sell them to people that BOUGHT THE TRUNK from them???
If anyone has a clue I would appriecate it. If you want i can take a picture of the Setup. Not a problem I have taken the damn thing off many times already.
Alleyoop
..BAD TO THE BONE..
