New Student
Currently Offline
Posts: 1
A+'s: 0
Joined: May 20, 2018 18:30:02 GMT -6
|
Post by kpage92 on May 20, 2018 18:34:57 GMT -6
So I just bought a scooter dirt cheap due to it not running it has no spark I have tried multiple CDI and coils the person before me put a brand new stator in. When I test it I get good results from the trigger wire but the exciter coil wire shows low ohms and only 39v when cranking I ordered a new stator. I noticed the ground from the battery goes to the bolt on the head and not the frame and the smaller ground wire that goes into the wiring harness is attached to the same bolt. Is this an issue?
|
|
|
Post by cyborg on May 21, 2018 7:08:13 GMT -6
I wouldn't think so,,but I'd run the battery ground to the frame then a beefy wire to the engine and the harness ground to the same bolt,,,that should clear up the problem I would think
|
|