Longjia lj50qt-k By oldgit1 (Read 2,045 times)

[oldgit1]

Hi would any one have available a wiring diagram for a 2010 longjia lj50qt-k which has an engine designation LJ1PE40QMB any help would be appreciated thanks cliff

[JR]

oldgit1

Try this one:

thescooterprofessor.proboards.com/thread/3185/generic-typical-wiring-diagram-colored

JR

[oldgit1]

Thanks

[oldgit1]

Hi admin, changed the stator believing that to be the issue.. All the wiring is correct, I will check the pick up to cdi tomorrow which if I read another post correctly should be. *5 to 1*5 volts which I expect to be correct due to new stator... Ped not starting....would you know if this ped has a rectifier involved for starting or is it stator to cdi to coil... What should I expect to see voltage wise in and out of the cdi please... Can't seem to find colour of wire from cdi to coil... Thanks

[JR]

oldgit1 The rectifier has nothing to do with it starting, is for charging only. But as you stated you do have to have pick up coil voltage to tell the CDI when to fire.

Let me know what you find out on the pick up coil.

JR

[oldgit1]

Expected the stator to be good after fitting new one, checked the kill switch and switch on the sidestand they were both OK... Checked wiring on bike between stator and cdi all good..checked grounds all good.. Nothing coming out of cdi.. Have ordered new cdi and coil to see what happens.. Should arrive Wednesday, then take it from there.. Hopefully will all be good

[oldgit1]

Getting a little peeved now, new stator, cdi ( ac) , coil, plug, and plug cap and still not starting.. Don't know what else to look for

[oldgit1]

Sorted wiring problem with the kill switch

Sent from my D6503 using Tapatalk

[oldgit1]

Finished everything on the boys ped what do you think

[JR]

Nice oldgit1 ! so is she running well now?

JR

[oldgit1]

Yeah better than ever thanks for your help