|
|
Post by brucewayne on Aug 7, 2014 22:04:12 GMT -6
|
|
|
|
Post by ellpee on Aug 8, 2014 8:05:51 GMT -6
Huh?
|
|
|
|
Post by alleyoop on Aug 8, 2014 15:09:22 GMT -6
Which gasket are you talking about and a lock washer goes right behind the head screw to put pressure on it outwards so it does not vibrate loose.
Alleyoop
|
|
|
|
Post by brucewayne on Aug 8, 2014 17:50:02 GMT -6
added the video already, sorry about the delay
|
|
|
|
Post by alleyoop on Aug 8, 2014 19:43:08 GMT -6
No, the lock washers go under the NUT which tightens on the METAL FLANGE, The Gasket is BEHIND the metal flange and on the motor, then you put a lock washer on the stud and then screw the nut on. Alleyoop See the METAL FLANGE THAT COVERS THE GASKET: then you see the two nuts Well the LOCK WASHERS go under the nuts. What the lock washers do is put OUTWARD pressure on the nut so it does not vibrate loose.  |
|
|
|
Post by brucewayne on Aug 8, 2014 20:57:32 GMT -6
^^^understood alley, will do, thanks AGAIN.  |
|
..BAD TO THE BONE..