|
|
Post by alleyoop on Jun 16, 2014 21:30:59 GMT -6
Look at this picture I labeled with a QUESTION: Alleyoop  |
|
|
|
Post by Mimi on Jun 16, 2014 21:37:14 GMT -6
My dad is looking right now to see if that hose goes to the pump
|
|
|
|
Post by alleyoop on Jun 16, 2014 21:40:45 GMT -6
I will bet it goes to ANOTHER "T" and from that "T" a VACUUM LINE GOES to that GAS TANK VENT CANISTER.
Did you guys try closing the FUEL RATIO MIXTURE until it stops and then turn it out 2 1/2 turns yet.
With that MAIN VACUUM LINE FIXED fuel should flow much better now when you crank it.
Alleyoop
|
|
|
|
Post by Mimi on Jun 16, 2014 21:42:14 GMT -6
.. there is a second t that goes to the fuel pump and the vac canister and his t is above the the t shown in the pic
|
|
|
|
Post by alleyoop on Jun 16, 2014 21:42:47 GMT -6
I will bet it goes to ANOTHER "T" and from that "T" a VACUUM LINE GOES to that GAS TANK VENT CANISTER. Also from that canister ONE HOSE you will find goes to either the AIR BOX or the TUBING going to the carb. If you take that off WHICH I RECOMMEND PLUG that connector on the AIR BOX or TUBING where the hose from the canister connected to.
Did you guys try closing the FUEL RATIO MIXTURE until it stops and then turn it out 2 1/2 turns yet.
With that MAIN VACUUM LINE FIXED fuel should flow much better now when you crank it.
Alleyoop
|
|
|
|
Post by Mimi on Jun 16, 2014 21:44:23 GMT -6
Its getting dark now so we will do the fuel mix screw tomorrow.
Thank you for your help tonight Alley...
|
|
|
|
Post by alleyoop on Jun 16, 2014 21:45:27 GMT -6
So on the picture I labled asking if that hose went to the PUMP goes to another "T"? Like I said you should take the CANISTER OFF and then you will have that one "T" right off the INTAKE MANIFOLD one line going over the carb where it is going now and the OTHER HOSE off the "T" STRAIGHT to the FUEL PUMP. The rest is crap. Alleyoop Here is MY OWN SETUP and what yours should also be: Alleyoop  |
|
|
|
Post by Mimi on Jun 16, 2014 21:52:45 GMT -6
Thank you for the last picture. I will let you know what happens tomorrow...
|
|
|
|
Post by alleyoop on Jun 16, 2014 21:57:45 GMT -6
Cool, will check back tomorrow.
Alleyoop
|
|
|
|
Post by alleyoop on Jun 21, 2014 11:23:08 GMT -6
What ever happened here?
Alleyoop
|
|
|
|
Post by Mimi on Jun 22, 2014 10:59:35 GMT -6
Hi Alleyoop
Haven't had a chance to get back to the bike. My dad has been busy with work. Im hoping today we can get it done. I may just have to follow your directions and do it myself.
Thank you
|
|
|
|
Post by alleyoop on Jun 22, 2014 11:07:48 GMT -6
Cool, it is not hard just take all the other crap off and setup the Vacuum hoses like in my picture ONE TO THE PETCOCK or FUEL PUMP whichever you have and the other to the ACV VALVE on the carb and your done. And you will have extra vacuum hoses for spares.
Alleyoop
|
|
|
|
Post by Mimi on Jun 24, 2014 12:45:19 GMT -6
Alright Alley Im going to try and do this by myself. Im just going to follow what you have sent me. I will let you know what happens...
|
|
|
|
Post by alleyoop on Jun 24, 2014 13:03:05 GMT -6
Great, if your not sure of something put a pic up and ask what to do with this or that you will do just fine maybe just some dirty finger nails(HAHA).
Alleyoop
|
|
|
|
Post by Mimi on Jun 24, 2014 13:34:22 GMT -6
Im going to try the fuel mix screw first before I do anything else. ..
|
|
..BAD TO THE BONE..
